6009-2Z-C3

Bore diameter:	45
Outer diameter:	75
Width:	16
Sealing:	cover shields on both sides
Cage:	steel cage
Bearing clearance:	C3 (slightly increased)
Material:	standard

Sold out

6009-MA-C3

Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with solid brass cage, open and not greased, FAG

Price on request

Sold out

RKU75-NX-V

Corrosion-resistant guide roller RKU.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, concentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€650.79

Details

Sold out

R067125045

Super linear bushing KBA-O-50-VD with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with complete sealing, Rexroth

€180.53

Details

Sold out

R061105010

Standard linear bushing KBM-E-50-D, linear bushings, closed robust all-metal design, hardened and ground sleeve, adjustable radial clearance, steel guide cage, with wiper seal on one side, ungreased, Rexroth

€119.16

Details

Sold out

R073325045

Super linear bushing KBH-O-50-VD for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with complete sealing, Rexroth

€228.35

Details

PAP7040-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€698.01

PAP7040-P10 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€354.73

PAP7050-P11 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,111.99

PAP7040-P200 - 1000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€14,908.73

Sold out

R150251086

Single nut with flange, FEM-E-C 50X5RX3,5-5, Ball screw assemblies, sealed, Rexroth

€588.59

Details

PAP7050-P200 - 1x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€15.75

PAP7040-P20 - 100x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€1,171.15

PAP7070-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€972.67

Sold out

LF18

Adjusting nut LF.., spring nuts for precise adjustment, axial locking, standard clamping system with two clamping screws on one spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€137.18

Details

PAP7070-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€18,122.33

Product information "6009-2Z-C3"