R065825176

€11.48

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1113916

Manufacturer: Rexroth

Weight: 0.01 kg

Product information "R065825176"

Compact ball bushing KBC-12-DD-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seals integrated on both sides, without grease, Rexroth

Bore diameter:	12
Outer diameter:	19
Lenght:	28
Material:	standard

Similar products

R067021040

Super linear bushing KBA-10-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€28.70

Sold out

GLG08-20-500

Heavy-duty spherical-plain bearing GLG.., sliding combination steel - DURBAL-Glide (polyamid-PTFE-fibreglass-compound), series G, maintenance-free, Durbal

Price on request

NATR6

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring and needle cage, without seals, IDC

€12.35

FRNR19-EI

Guide roller FRNR..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€92.60

61800-2RSR-HLC

Single row deep groove ball bearing 18.., radial, with steel cage and contact seals on both sides, FAG

€8.09

NX10-Z-XL

Needle roller/axial ball bearing NX.., combined axial radial bearings, without inner ring, full complement single direction axial component, retained by protective cap, for grease lubrication, INA

€24.98

RSTO6-TV

Yoke type track roller RSTO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, without inner ring, with needle roller and cage assembly (polyamide cage), without axial guidance, open, not self-retaining, INA

€9.99

KRE19-PP-SK-A

Stud type track roller KRE.. with eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€44.30

LS0619

Bearing washer LS.., axial bearing washers, can be used as housing or shaft washer, suitable for needle roller and cage assemblies AXK.. and cylindrical roller and cage assemblies K811.., raceways hardened and ground, INA

€3.51

Sold out

DLF1310

Full complement needle bush DLF.., closed end design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

Price on request

Sold out

R065821276

Compact ball bushing KBC-12-DD, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seals integrated on both sides, without grease, Rexroth

€11.48

Details

DGEG08-E

Spherical-plain bearing, sliding combination steel / steel, series G, Durbal

€4.55

Sold out

KRV19

Full complement stud type track roller, outer ring with crowned profile R500, with screw driver slot, without seals, IDC

€21.49

Details

KH12-PP-RROC

Corrosion-resistant linear ball bearing KH.. for shaft guidance systems, compact range, outer ring machined, hardened, perforated, with ball and cage assembly integrated in plastic cage, seals on both sides, relubricatable, INA

€11.95

Sold out

GCL19-EEM-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, metal shielded, incl. lock washer and nut, Nadella

Price on request