FRNR19-EI

€92.60

Ready for immediate despatch: 7

Product number: 1038414

Manufacturer: Nadella

Weight: 0.035 kg

Product information "FRNR19-EI"

Guide roller FRNR..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

Outer diameter:	19
Lenght:	34
Sealing:	seals on both sides
Thread size:	M5x0,8
Material:	standard

We update the catalogues and catalogue extracts regularly, but we cannot guarantee that the latest version is available on our website. The latest catalogues can be found on the manufacturers' websites. You will often be able to view the items you are looking for individually with all the technical details, which is also our recommendation.

Linear Guide Systems - V-Line - Nadella

Similar products

Sold out

PF19

Track roller PF.., single row, with reinforced bolt, for high precision and load, convex outer ring, incl. lock washer and nut, Nadella

Price on request

RALR17.06

Floating guide roller RALR.., with double row ball bearing, version with "gothic arch" profile, eccentric, with ZZ shields on both sides, incl. lock washer and nut, Nadella

€61.60

KRE19-PP-A

Stud type track roller KRE.. with eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€38.47

KH12-PP

Linear ball bearing KH.. for shaft guidance systems, compact range, outer ring machined, hardened, perforated, with ball and cage assembly integrated in plastic cage, seals on both sides, relubricatable, INA

€7.96

NX10-XL

Needle roller/axial ball bearing NX.., combined axial radial bearings, without inner ring, full complement single direction axial component, retained by protective cap, for oil lubrication, INA

€30.62

Sold out

DCS08-M5x0,8

Angle joint DCS.., similar to DIN 71802, form CS, with clip locking, steel, surface galvanized, with right hand thread, Durbal

€3.03

Details

NATR6-PP-A

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

€17.94

KR19-X

Track roller with solid roller stud, with cage-guided needles and cylindrical outer ring, with screw driver slot, without seals, IDC

€23.64

Sold out

R065811296

Compact ball bushing KBC-12-D, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth

€10.91

Details

KR19-EE

Stud type track roller, with axial guidance, concentric, sealed on both sides with plastic axial plain washers, NRB

€10.08

KRV19-PP-A-NMT

Stud type track roller KRV.. without eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€32.12

FGL619-EE-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, with plastic seals, Nadella

€49.26

NA22/6-X-2RSR

Yoke type track roller NA22.., needle roller bearings, single row, thick-walled outer ring with cylindrical outside surface, with inner ring and needle roller and cage assembly (steel cage), without axial guidance, lip seals on both sides, INA

€18.65

NATR6

Yoke type track roller with profiled outer ring (contact optimized surface), with inner ring and needle cage, without seals, IDC

€12.35

Sold out

R067011040

Super linear bushing KBA-10-D with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€27.90

Details