R073304000

€129.42

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1114112

Manufacturer: Rexroth

Weight: 0.352 kg

Product information "R073304000"

Super linear bushing KBH-O-40 for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

Bore diameter:	40
Outer diameter:	62
Lenght:	80
Material:	standard

Similar products

Sold out

LRP38.150

Adjusting nut LRP.., wide type, spring nuts for precise adjustment, heavy-duty radial locking, clamping system with two clamping screw on each of two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€228.08

Details

Sold out

QJ206-XL-N2-MPA-T42B

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring with retaining grooves, split inner ring, with brass cage, open design, FAG

€51.46

Details

7206-B-XL-JP-UA

Angular contact ball bearing 72..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG

€31.83

NA4908

Needle roller bearing of series NA49.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, IDC

€27.31

NU2206-E-XL-TVP2-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with plastic cage, FAG

€30.01

7206-B-XL-TVP-P5-UO

Angular contact ball bearing 72..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€58.10

NCF2206-V

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling element, IDC

€66.03

Sold out

NUP206-E-XL-M1

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with two-piece roller guided brass cage, FAG

€68.38

Details

Sold out

7305-B-XL-TVP-P5

Angular contact ball bearing 73..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€47.54

Details

NNF5007-PP

Double row cylindrical roller bearing, locating bearing, three fixed ribs on inner ring, one fixed center rib on outer ring, full complement roller set, sealed on both sides, IDC

€70.97

NJ206-E-XL-M1

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€62.20