NUP206-E-XL-M1

€68.38

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1098670

Manufacturer: FAG

Weight: 0.242 kg

Product information "NUP206-E-XL-M1"

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with two-piece roller guided brass cage, FAG

Bore diameter:	30
Outer diameter:	62
Width:	16
Cage:	brass cage
Bearing clearance:	CN (normal)
Material:	standard

Similar products

CLK110 48x62

High-quality internal clamping set CLK110, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting without axial hub displacement, for medium to high torques, CMT Line

€46.40

NU2305-E-XL-M1-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with brass cage, FAG

€75.98

PNA40/62-XL

Adjusting needle roller bearing PNA.., with inner ring, single row, outer ring with spherical outside surface in outer sleeve with plastic back-up rings to compensate for misalignment, INA

€53.28

S206 - CB206

Built-in sprag freewheel CB2.., not self-centering (non bearing supported), one keyway on outer ring, CTS

Price on request

NU206-E-XL-K-TVP2-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with tapered bore, open, non-greased, separable, with plastic cage, FAG

€22.97

NUKRE62-A

Stud type track roller NUKR.., solid roller pin with eccentric collar, thick-walled outer ring with profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, INA

€123.01

Sold out

GCRL62-EEM-SW

Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella

Price on request

GLE30-XL-KRR-B

Radial insert ball bearing GLE.., non-locating, with drive slot in inner ring to prevent rotation, spherical outside surface of outer ring, compensates for misalignment, sealed on both sides, with steel cage, relubricatable, INA

€33.02

PWTR30-2RS-XL

Yoke type track roller PWTR.., with profiled outer ring (contact optimized surface), with center rib and full complement double-row cylindrical roller set, with axial guidance, full complement roller set, protected lip seals on both sides, INA

€64.96

Sold out

FKY62-C-NX

Corrosion-resistant guide roller FKY.. with tapered roller bearing, convex raceway sides, inner ring with holes for fixing on the shaft, with NBR seals type RS on both sides, Nadella

€631.52

Details

E30-XL-KLL

Radial insert ball bearing E..-KLL, cylindrical outer ring, with eccentric locking collar for mounting on shaft, triple lip seals on both sides, with plastic cage, not relubricatable, INA

€33.82

KRVE62-PP-A

Stud type track roller KRVE.. with eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€113.75

Sold out

RKXR62-C-NX

Corrosion-resistant guide roller RKXR.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€555.00

Details

Sold out

PKR62-C-NX-V

Corrosion-resistant guide roller PKR.. with tapered roller bearing, track roller, eccentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€517.76

Details

6305

Single row deep groove ball bearing 63.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€4.46