1206-K-TVH-C3 + H206

€14.41

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1099525

Manufacturer: FAG

Weight: 0.32 kg

Product information "1206-K-TVH-C3 + H206"

Self-aligning ball bearing 12.., double row radial ball bearings, tapered bore with 1:12 taper, open, with plastic cage, not greased, complete with adapter sleeve H.., FAG

Bore diameter:	25
Outer diameter:	62
Width:	27
Cage:	polyamide, hard fabric
Bearing clearance:	C3 (slightly increased)
Material:	standard

Similar products

Sold out

NU206-E-XL-K-TVP2

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with tapered bore, open, non-greased, separable, with plastic cage, FAG

€22.97

Details

FKN6206-2RS - CKN30-2RS

Sprag type freewheel CKN.., ball bearing freewheels, dimensions according to ball bearing 62.., self-centering, one keyway on the inner ring, water protection seals on both sides, CTS

€78.26

S206 - CB206

Built-in sprag freewheel CB2.., not self-centering (non bearing supported), one keyway on outer ring, CTS

Price on request

Sold out

RNAO50X62X20-XL

Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

€40.27

Details

Sold out

FGU3062-MM

Full complement single row track roller FGU.. without pin, light series, with optimized profiled outer ring, non-separable, metal shielded, Nadella

€257.37

Details

Sold out

GCRL62-EEM-SW

Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella

Price on request

Sold out

GCUL62

Full complement single row track roller GCUL.. with threaded stud, with cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

Price on request

Sold out

PKR62-C-NX-V

Corrosion-resistant guide roller PKR.. with tapered roller bearing, track roller, eccentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€517.76

Details

Sold out

FKY62-C-NX

Corrosion-resistant guide roller FKY.. with tapered roller bearing, convex raceway sides, inner ring with holes for fixing on the shaft, with NBR seals type RS on both sides, Nadella

€631.52

Details

Sold out

PFPL62

Cam follower PFPL.., with reinforced smooth stud design, with cylindrical outer ring, seals on both sides, Nadella

Price on request

Sold out

32206-H

Tapered roller bearing 322.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€16.38

Details

Sold out

R065815040

Compact ball bushing KBC-50-D, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth

€33.14

Details

Sold out

RKXR62-C-NX

Corrosion-resistant guide roller RKXR.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€555.00

Details

Sold out

R067014076

Super linear bushing KBA-40-D with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€83.26

Details

Sold out

6206-MA-C3

Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with solid brass cage, open and not greased, FAG

Price on request