203-XL-KRR-AH02-C5

€13.79

Ready for dispatch within 3-5 working days: 60

Product number: 1099518

Manufacturer: INA

Weight: 0.08 kg

Product information "203-XL-KRR-AH02-C5"

Deep groove ball bearing 2..-KRR, radial insert ball bearing with cylindrical outside surface of the outer ring, width inner ring with cylindrical bore for fit, sealed on both sides, with plastic cage, INA

Bore diameter:	16,2
Outer diameter:	40
Width:	18,3
Sealing:	seals on both sides
Cage:	polyamide, hard fabric
Material:	standard

Similar products

Sold out

GC40-EEM-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, metal shielded, incl. lock washer and nut, Nadella

€122.89

Details

IR35X40X20-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€7.87

Sold out

GCURL40-MM

Full complement single row track roller GCURL.. with threaded stud, with cylindrical outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella

€191.52

Details

K28X40X18/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€18.24

R065823030

Compact ball bushing KBC-30-DD-NR, ball bushing guides, stainless material, POM ball retainer, normal radial internal clearance, wiper seals integrated on both sides, without grease, Rexroth

€45.36

Sold out

R065815540

Compact ball bushing KBC-30-D-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seal on one side, without grease, Rexroth

€19.54

Details

K35X40X27-TV/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, polyamide cage, open, INA

€7.21

Sold out

R150224085

Single nut with flange, FEM-E-C 25X10RX3-4, Ball screw assemblies, sealed, Rexroth

€399.41

Details

Sold out

R065825576

Compact ball bushing KBC-30-DD-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seals integrated on both sides, without grease, Rexroth

€20.21

Details

NATV17

Yoke type track roller NATV.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring, full complement, gap seals on both sides, INA

€34.73

Sold out

DPOS16 M16x1,5

Standard rod end DPOS.. with pressed spherical plain bearing, sliding pair steel-brass, series K, male right hand thread, zinc plated, relubricatable, Durbal

€12.39

Details

Sold out

R067012540

Super linear bushing KBA-25-D with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€52.11

Details

Sold out

NUKR40-X-A-NMT

Stud type track roller NUKR.., solid roller pin, thick-walled cylindrical outer ring, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, incl. fixing nut, INA

€64.48

Details

Sold out

DSA15-ES-2RS

Standard rod end DSA..-ES with pressed spherical plain bearing, sliding pair steel-steel, series E, male right hand thread, zinc plated, with lip seals on both sides, relubricatable, Durbal

€10.96

Details

Sold out

R067322576

Super linear bushing KBB-O-25-DD without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth

€55.82

Details