2201-TVH-C3

€17.83

Ready for dispatch within 3-5 working days: 21

Product number: 1039214

Manufacturer: FAG

EAN: 4012801160186

Weight: 0.05 kg

Product information "2201-TVH-C3"

Self-aligning ball bearing 22.., double row radial ball bearings, cylindrical bore, open, with plastic cage, not greased, FAG

Bore diameter:	12
Outer diameter:	32
Width:	14
Cage:	polyamide, hard fabric
Bearing clearance:	C3 (slightly increased)
Material:	standard

Similar products

3201-BB-2Z-TVH

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, steel shields on both sides, FAG

€22.51

CSK12 - UK12-ZZ

Sprag type freewheel UK.., ball bearing freewheels, dimensions according to ball bearing 62.., self-centering, shielded on both sides, without keyways, operating temperature -10°C to +60°C, CTS

€31.75

KBS20-PP

Linear ball bearing KBS.. for shaft guidance systems, machined range, slotted design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, INA

€34.90

Sold out

GCL32-EE-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, with plastic seals, incl. lock washer and nut, Nadella

Price on request

Sold out

52202

Axial deep groove ball bearing 522.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€29.12

Details

FRNR32-EI

Guide roller FRNR..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€135.35

Sold out

RNAB11012

Full complement needle cam follower RNAB11.., with solid convex outer ring, max. slope of 1,5%, without inner ring (for combination with inner rings BI.., BIC..), Nadella

Price on request

FRNR32-EI-NX

Corrosion-resistant guide roller FRNR..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€258.97

Sold out

R067322045

Super linear bushing KBB-O-20-VD without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with complete sealing, Rexroth

€52.06

Details

KM4

Lock nut KM.., for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric right-hand thread, BGL

€2.44

Sold out

R067302000

Super linear bushing KBB-O-20 without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth

€41.36

Details

Sold out

R073312040

Super linear bushing KBH-O-20-D for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

€66.02

Details

R063202000

Standard linear bushing KBM-O-20-DD, linear bushings, open robust all-metal design, hardened and ground sleeve, with locating hole for axial and radial securing, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€39.48

DSG16-PB

Spherical-plain bearing DSG..-PB, sliding combination steel stainless - brass , series K, relubricatable, Durbal

Price on request

Sold out

R074222530

Standard linear bushing KBMM-25-DD-NR, tandem with centered square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€575.68

Details