3002-2RS

€20.15

Ready for dispatch within 3-5 working days: 3

Product number: 1079812

Manufacturer: INA

Weight: 0.05 kg

Product information "3002-2RS"

Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA

Bore diameter:	15
Outer diameter:	32
Width:	13
Sealing:	seals on both sides
Cage:	polyamide, hard fabric
Bearing clearance:	CN (normal)
Material:	standard

Similar products

NA2201-2RSR

Yoke type track roller NA22.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, with inner ring and needle roller and cage assembly (steel cage), without axial guidance, lip seals on both sides, INA

€30.51

BEF12-41-502

Heavy-duty rod end BEF.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female left hand thread, tight clearance, Durbal

€32.28

Sold out

KR32-X-B-NMT

Stud type track roller KR..X without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with cylindrical profile, gap seals on both sides, incl. nut and lub. nipple, INA

€45.82

Details

NATR12-X-PP

Yoke type track roller with cylindrical outer ring, with inner ring and needle cage, seals on both sides, IDC

€28.03

LR200-X-2RSR

Single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with cylindrical outer surface, with plastic cage, lip seals on both sides, INA

€18.57

7E-HKS25X32X30-8A

Drawn cup needle roller bearings with cage, open ends, NTN

€9.97

KBO20-PP

Linear ball bearing KBO.. for shaft guidance systems, machined range, open design - segment cut-out, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, INA

€43.66

Sold out

FGL1232-EEM-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, metal shielded, Nadella

€67.35

Details

HF2520-L564

Drawn cup roller clutch HF.. without bearing support, one-way clutches, plastic springs (KF), knurled outer surface, without sealing, to combine with drawn cup needle roller bearings HK and BK, INA

€16.67

Sold out

FR32-EU-AS-NX

Corrosion-resistant Euroroller FR..-EU-AS with double row angular contact ball bearing, pin with internal thread in inner ring, concentric, with NBR seals type RS on both sides, Nadella

€185.72

Details

HK2518-RS-L271

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row design, sealed on one side, with steel cage, without lubrication hole, INA

€5.60

Sold out

FRR32

Guide roller FRR.., special rollers, two separate modified ball bearings, eccentric, sealed, incl. lock washer and nuts, Nadella

Price on request

Sold out

R067112040

Super linear bushing KBA-O-20-D with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€42.23

Details

Sold out

PFPL32

Cam follower PFPL.., with reinforced smooth stud design, with cylindrical outer ring, seals on both sides, Nadella

€90.86

Details

R067322040

Super linear bushing KBB-O-20-DD without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth

€43.37