32009-X-XL
€18.78
Ready for dispatch within 3-5 working days: 506
Product information "32009-X-XL"
| Bore diameter: | 45 |
|---|---|
| Outer diameter: | 75 |
| Width: | 20 |
| Cage: | steel cage |
| Material: | standard |
Similar products
Regular price:
Product number:
1040580
Manufacturer:
FAG
EAN:
4047643126694
Weight:
0.35 kg
Tapered roller bearing 320.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG
Skip product gallery
Sold out
ARNBT2575
Combined precision roller bearing ARNBT.., radial bearing part: needle roller bearing with cage, lateral: axial cylindrical roller bearings with thrust washers, adjustable axial preload, with bolt-on holes, Nadella
Price on request
Sold out
KM11x1,5-E
Regular price:
€6.29
Lock nut KM..-E, for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric left-hand thread, BGL
6009-2RSR
Regular price:
€8.90
Single row deep groove ball bearing 60.., radial, with steel cage and contact seals on both sides, FAG
ZARF2575-L-TV-A
Regular price:
€555.89
Needle roller axial cylindrical roller bearing ZARF-L with long shaft locating washer, combined axial radial high-precision bearings for screw drives, light series, double direction, with locating holes, INA
KBS50-PP-AS
Regular price:
€108.75
Linear ball bearing KBS.. for shaft guidance systems, machined range, slotted design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA
Sold out
R067115040
Regular price:
€143.10
Super linear bushing KBA-O-50-D with misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth
Sold out
R073005000
Regular price:
€328.26
Super linear bushing KBSH-50 for very high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth
PAP7050-P10 - 2500x
Regular price:
€33,123.68
Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®
Sold out
R150255066
Single nut with flange, FEM-E-C 50X12RX6-6, Ball screw assemblies, sealed, Rexroth
Price on request
PAP7040-P200 - 2500x
Regular price:
€36,653.18
Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®
DGE45-SW
Angular contact spherical-plain bearing DGE..-SW, sliding combination steel-steel, bonded with PTFE-fabric, hard chrome-plated inner ring running surface, maintenance-free, Durbal
Price on request
PAP7040-P20 - 50x
Regular price:
€616.39
Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®
XV30
Crossed roller bearing, series XV.., split inner ring, outer ring with screw mounting holes, cylindrical rollers arranged crosswise with polymer separators, greased, sealed, IDC
Price on request