3206-BD-XL-2Z-TVH-C3

Bore diameter:	30
Outer diameter:	62
Width:	23,8
Sealing:	cover shields on both sides
Cage:	polyamide, hard fabric
Bearing clearance:	C3 (slightly increased)
Material:	standard

Sold out

R073014040

Super linear bushing KBSH-40-D for very high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

€215.78

Details

Sold out

R074024030

Standard linear bushing KBMF-40-DD-NR with square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€456.36

Details

Sold out

KSO40

Linear ball bearing KS.. for shaft guidance systems, heavy-duty series, open design - segment cut-out, angle-adjustable, without seals, relubricatable, INA

€65.42

Details

PAW38-P10 - 1x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Price on request

Sold out

R060004000

Standard linear bushing KBM-40, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, without sealing rings, ungreased, Rexroth

€69.29

Details

Sold out

SL182206-A-XL-C3

Single row cylindrical roller bearing SL1822.., with full complement roller set, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, INA

€76.55

Details

PAW38-P14 - 30x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€96.05

Sold out

R067204000

Super linear bushing KBB-40 without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth

€82.02

Details

Sold out

R060204030

Standard linear bushing KBM-40-DD-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, stainless steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€269.12

Details

PAW38-P200 - 2500x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€10,052.25

PAW38-P200 - 30x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€151.53

Sold out

3206-BD-XL-2HRS-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with steel cage and contact seals on both sides, FAG

€39.94

Details

Sold out

3305-BD-XL-C3

Double row angular contact ball bearing 33.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with steel cage, FAG

€39.00

Details

Sold out

LFE14

Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€225.71

Details

Sold out

QJ206-XL-N2-MPA-T42B

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring with retaining grooves, split inner ring, with brass cage, open design, FAG

€51.46

Details

Product information "3206-BD-XL-2Z-TVH-C3"