3309-BD-XL-2HRS-TVH-C3

Bore diameter:	45
Outer diameter:	100
Width:	39,7
Sealing:	seals on both sides
Cage:	polyamide, hard fabric
Bearing clearance:	C3 (slightly increased)
Material:	standard

IR90X100X26-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€39.89

DGE65-SX

Angular contact spherical-plain bearing DGE..-SX, sliding combination steel-steel, phosphated, relubricatable, Durbal

Price on request

211-XL-KRR

Deep groove ball bearing 2..-KRR, radial insert ball bearing with cylindrical outside surface of the outer ring, width inner ring with cylindrical bore for fit, sealed on both sides, with plastic cage, INA

€77.02

NUTR45100-X-A

Yoke type track roller NUTR.., with cylindrical outer ring, inner ring and flange rings, full complement roller set, labyrinth seals on both sides, INA

€123.01

NCF3013-V-C3

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC

€93.02

Sold out

GCURL100-MM

Full complement single row track roller GCURL.. with threaded stud, with cylindrical outer ring, eccentric, metal shielded, incl. lock washer and nut, Nadella

Price on request

51115

Axial deep groove ball bearing 511.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€27.06

NNCF5013-V

Double row cylindrical roller bearing, support bearing, three fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC

€159.47

Sold out

SL045013

Double row cylindrical roller bearing SL04.. with full complement roller set, locating bearing, three fixed ribs on inner ring, one fixed center rib on outer ring, without seals, INA

€140.23

Details

Sold out

32013-X-H

Tapered roller bearing 320.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€37.95

Details

PWTR45100-2RS

Yoke type track roller with profiled outer ring (contact optimized surface), with center rib and cylindrical rollers, full complement roller set, seals on both sides, IDC

€96.24

PAP95100-P10 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,030.14

6211

Single row deep groove ball bearing 62.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€12.13

Sold out

10X22211-EA-W33-EE-L

Low noise spherical roller bearing, double row, cylindrical bore, groove and lubrication holes on outer ring, contact seals on both sides, SNR

€97.49

Details

PAP9560-P10 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€202.33

Product information "3309-BD-XL-2HRS-TVH-C3"