7203-B-XL-TVP-UA

€22.02

Ready for dispatch within 3-5 working days: 40

Product number: 1042747

Manufacturer: FAG

EAN: 4012801011785

Weight: 0.07 kg

Product information "7203-B-XL-TVP-UA"

Angular contact ball bearing 72..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

Bore diameter:	17
Outer diameter:	40
Width:	12
Cage:	polyamide, hard fabric
Material:	standard

Similar products

203-XL-KRR-AH02

Deep groove ball bearing 2..-KRR, radial insert ball bearing with cylindrical outside surface of the outer ring, width inner ring with cylindrical bore for fit, sealed on both sides, with plastic cage, INA

€12.89

Sold out

FRR40-EI

Guide roller FRR..-EI, special rollers, with double row ball bearing, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

Price on request

ROTEX 19 ALU - MatNr: 020196102000

ROTEX 19 ALU hub 1.0 Ø20H7 key DIN 6885/1-JS9 > component 1a - #020196102000, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€15.54

Sold out

R060002530

Standard linear bushing KBM-25-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, stainless steel guide cage, without sealing rings, ungreased, Rexroth

€108.07

Details

ROTEX 19 ST - MatNr: 020195122280

ROTEX 19 ST hub 1.0 Ø22,225+0,0254 key code G > b=4,762+0,051 (ANSI/AGMA 9002-C14 Ø7/8"x3/16") component 1a - #020195122280, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€18.38

7203-B-XL-TVP-P5-UO

Angular contact ball bearing 72..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€42.04

ROTEX 19 ALU - MatNr: 020196100050

ROTEX 19 ALU hub Ø18 pilot bored component 1a - #020196100050, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€7.14

IR35X40X30-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€11.47

Sold out

R150224085

Single nut with flange, FEM-E-C 25X10RX3-4, Ball screw assemblies, sealed, Rexroth

€399.41

Details

Sold out

GC40-EEM-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, metal shielded, incl. lock washer and nut, Nadella

€122.89

Details

K35X40X26-ZW-A/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, double-row design, cage made of sheet steel, open, INA

€13.15

Sold out

DSA15-ES-2RS

Standard rod end DSA..-ES with pressed spherical plain bearing, sliding pair steel-steel, series E, male right hand thread, zinc plated, with lip seals on both sides, relubricatable, Durbal

€10.96

Details

Sold out

R065815540

Compact ball bushing KBC-30-D-RT, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, wiper seal on one side, without grease, Rexroth

€19.54

Details

NUKRE40-A

Stud type track roller NUKR.., solid roller pin with eccentric collar, thick-walled outer ring with profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, INA

€70.42

PF15-00-501

Heavy-duty rod end PF.. with integral self-aligning ball bearing, female right hand thread, with shields on both sides, relubricatable, Durbal

€71.33