7916-U-C-G-GN-P42

€240.40

Ready for immediate despatch: 6

Product number: 1015370

Manufacturer: NTN

Weight: 0.38 kg

Product information "7916-U-C-G-GN-P42"

Super precision angular contact ball bearing (spindle bearing), contact angle α = 15°, universal design, NTN

Bore diameter:	80
Outer diameter:	110
Width:	16
Cage:	polyamide, hard fabric
Material:	standard

Alternative articles to "7916-U-C-G-GN-P42"*

1044190 - B71916-C-T-P4S-UL - NTN
71916 CDGA/P4A - SKF
7916 CTRSULP3 - NSK

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

30310-A

Tapered roller bearing 303.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€40.07

GFRN35/38 - GLP35/38

Roller type freewheel GLP.. (basic unit to be mounted with covers), two ball bearings of series 160.. supported, one keyway on the inner ring, one keyway and threated holes on outer ring, incl. flat seals, CTS

Price on request

GAY60-XL-NPP-B

Radial insert ball bearing GAY.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, lip seals on both sides, with plastic cage, relubricatable, INA

€58.17

6310-C-C3

Single row deep groove ball bearing 63.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€18.15

RKX110-C

Guide roller RKX.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, concentric, sealed on both sides, incl. lock washers and nuts, Nadella

€557.98

Sold out

GCUL110

Full complement single row track roller GCUL.. with threaded stud, with cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

Price on request

Sold out

6310-MA

Single row deep groove ball bearing 63.., radial ball bearings, cylindrical bore, with solid brass cage, open and not greased, FAG

Price on request

Sold out

NA1075

Full complement needle roller bearing NA1.., complete bearing, assembly of solid through-hardened outer ring RNA1.. with needle rollers set and BI1.. inner ring, with lubrication hole and groove, Nadella

€335.45

Details

PAP105115-P10 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€45.56

GS81117

Housing locating washer GS811.., thrust bearing washers, externally centered, made from through-hardened rolling bearing steel, raceways precision ground, bore and outside diameter precision machined, INA

€33.75

H217

Adapter sleeve H2.., metric dimensions, for mounting roller bearings with tapered bore on cylindrical shaft seat, complete with shaft nut KM.. and lock washer MB.., BGL

€17.18

3310-BD-XL-TVH-L285

Double row angular contact ball bearing 33.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with plastic cage, FAG

€101.30

21310-E1-XL-K

Spherical roller bearing, double row, 213..-E1-K series, tapered bore, with steel cage, groove and lubrication holes on outer ring, FAG

€72.45

1310-K-TVH-C3

Self-aligning ball bearing 13.., double row radial ball bearings, tapered bore with 1:12 taper, open, with plastic cage, not greased, FAG

€56.91

22310-E1A-XL-K-M-C3

Spherical roller bearing, double row, 223..-E1A-K series, tapered bore, with brass cage, groove and lubrication holes on outer ring, FAG

€105.83