AM17

€79.69

Ready for dispatch within 3-5 working days: 2

Product number: 1078773

Manufacturer: INA

Weight: 0.07 kg

Product information "AM17"

Precision locknut AM, for preloading bearings for screw drives, axially clampable with four segments, INA

Bore diameter:	17
Outer diameter:	32
Width:	18
Thread size:	M17x1
Material:	standard

Similar products

DSA12-T/K M12x1,5

Standard rod end DSA..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, male right hand thread, zinc plated, maintenance-free, Durbal

€8.66

3201-BB-2RSR-TVH

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, FAG

€23.48

Sold out

7201-B-XL-TVP-P5-UL

Angular contact ball bearing 72..-B-TVP, single-row, contact angle α = 40°, with solid polyamide cage, open - without seals, not greased, FAG

€41.89

Details

FRR32-EU

Euroroller FRR..-EU, with double row angular contact ball bearing, light convex raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€80.15

PAW18-P180 - 50x

Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€101.60

BEF12-60-501

Heavy-duty rod end BEF.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female right hand thread, maintenance-free, Durbal

€37.47

Sold out

R067222076

Super linear bushing KBB-20-DD without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with two integrated wiper seals, Rexroth

€41.29

Details

16002-A

Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€5.60

Sold out

R063002000

Standard linear bushing KBM-O-20, linear bushings, open robust all-metal design, hardened and ground sleeve, with locating hole for axial and radial securing, steel guide cage, without sealing rings, ungreased, Rexroth

€35.01

Details

Sold out

BBE20

Closed standard ball bushing (linear ball bearing), standard, plastic cage, without seals, SNR

Price on request

PAP2830-P200 - 5000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€19,077.83

Sold out

BRTF12-61-501

Heavy-duty rod end BRTF.. in stainless steel, with integral self-aligning roller bearing, series K, fine female right hand thread, cage design, with shields on both sides, relubricatable, Durbal

€182.63

Details

Sold out

3201-2RS-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with steel cage, seals on both sides, INA

€23.48

Details

RPNA18/32-XL

Adjusting needle roller bearing RPNA.., without inner ring, single row, outer ring with spherical outside surface in outer sleeve with plastic back-up rings to compensate for misalignment, INA

€25.86

Sold out

ET2432

Radial seal ring, ET.. series, for sealing needle roller bearings, made of sheet steel-reinforced elastomer, Nadella

Price on request