B7002-E-T-P4S-UL

€86.64

Ready for dispatch within 3-5 working days: 18

Product number: 1043573

Manufacturer: FAG

EAN: 4012801167048

Weight: 0.03 kg

Product information "B7002-E-T-P4S-UL"

Super precision angular contact ball bearing B70..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

Bore diameter:	15
Outer diameter:	32
Width:	9
Cage:	polyamide, hard fabric
Material:	standard

Alternative articles to "B7002-E-T-P4S-UL"*

1013970 - 7002-U-AD-G-GL-P42 - NTN
7002 ACDGA/P4A - SKF
7002 A5TRSULP3 - NSK

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

Sold out

R067022076

Super linear bushing KBA-20-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€41.29

Details

Sold out

FRNR32

Special guide roller FRNR.. with needle roller bearing, raceway with O-ring, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€214.25

Details

Sold out

R067225340

Super linear bushing KBB-20-DD-RT without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with two integrated wiper seals, Rexroth

€41.29

Details

KR32-EE

Cam follower KR.. with concentric pin, with cage-guided needles and convex outer ring, plastic seals on both sides, with hexagon socket, incl. clamping nut, Nadella

€67.16

Sold out

R065022030

Standard linear bushing KBMT-20-DD-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, stainless steel guide cage and retaining rings, with two integrated wiper seals, ungreased, Rexroth

€158.57

Details

Sold out

KRE32-EE

Cam follower KRE.. with pin and eccentric collar, with cage-guided needles and convex outer ring, plastic seals on both sides, with hexagon socket, incl. clamping nut, Nadella

€68.05

Details

Sold out

R073302000

Super linear bushing KBH-O-20 for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, without wiper seals, Rexroth

€62.00

Details

KM4

Lock nut KM.., for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric right-hand thread, BGL

€2.44

Sold out

R073122040

Super linear bushing KBSH-O-20-DD for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with two integrated wiper seals, Rexroth

€118.85

Details

Sold out

MB3A

Securing plate MB..A, reinforced design, to secure metric lock nuts KM.. and HM.. on shafts or adapter sleeves by means of tab bending, according to DIN 5406, made of steel, BGL

€0.68

Details

Sold out

R074252000

Standard linear bushing KBMM-20-DD, tandem with centered square flange, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€193.64

Details

R063202000

Standard linear bushing KBM-O-20-DD, linear bushings, open robust all-metal design, hardened and ground sleeve, with locating hole for axial and radial securing, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€39.48

Sold out

R067202000

Super linear bushing KBB-20 without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth

€39.35

Details

PAP2830-P10 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€80.89

6201-C-2Z

Single row deep groove ball bearing 62.., radial, with steel cage and sheet steel shields on both sides, FAG

€2.11