B71900-E-T-P4S-UL

€74.48

Ready for dispatch within 3-5 working days: 35

Product number: 1043991

Manufacturer: FAG

EAN: 4012801616164

Weight: 0.01 kg

Product information "B71900-E-T-P4S-UL"

Super precision angular contact ball bearing B719..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

Bore diameter:	10
Outer diameter:	22
Width:	6
Cage:	polyamide, hard fabric
Material:	standard

Alternative articles to "B71900-E-T-P4S-UL"*

1015334 - 7900-U-AD-G-GL-P42 - NTN
71900 ACDGA/P4A - SKF
7900 A5TRSULP3 - NSK

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

30/8-B-2Z-TVH

Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, steel shields on both sides, FAG

€18.12

PFL22

Track roller PFL.., single row, with reinforced bolt, for high precision and load, cylindrical outer ring, incl. lock washer and nut, Nadella

€61.11

DPOSL08

Standard rod end DPOSL.. with pressed spherical plain bearing, sliding pair steel-brass, series K, male left hand thread, zinc plated, relubricatable, Durbal

€6.29

Sold out

NAO9X22X12-TV-XL

Single row needle roller bearing NAO.., radial needle roller bearings, non-locating, without ribs on outer ring, with inner ring, non-self-retaining, polyamide cage, open, INA

€13.90

Details

Sold out

GCL22-EEM-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, metal shielded, incl. lock washer and nut, Nadella

Price on request

Sold out

R067011240

Super linear bushing KBA-12-D with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth

€29.42

Details

C106-ZZ

Profiled guide roller C..-ZZ with pin, double row bearing, concentric, steel shields on both sides, incl. lock washer and nuts, CTS

€21.89

Sold out

R060001256

Standard linear bushing KBM-12, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, without sealing rings, ungreased, Rexroth

€24.13

Details

KN12-B-PP

Linear ball bearing KN.. for shaft guidance systems, lightweight range, closed design, plastic cage with inserted raceway plates, angle-adjustable, relubricatable, seals on both sides, INA

€22.07

Sold out

KBS12-P

Linear ball bearing KBS.. for shaft guidance systems, machined range, slotted design, outer ring hardened and ground, high-precision guidance in plastic cage, one side sealed, INA

€25.06

Details

KM1

Lock nut KM.., for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric right-hand thread, BGL

€2.44

DGE12-LO

Radial spherical-plain bearing DGE..-LO, sliding combination steel-steel, series W, phosphated, outer ring with single split, relubricatable, Durbal

€4.20

FRN22-EI

Guide roller FRN..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, concentric, sealed on both sides, incl. lock washers and nuts, Nadella

€86.73

FRLR22-EU

Floating guide roller FRLR..-EU, with double row angular contact ball bearing, light convex raceway side, eccentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€61.53

R060201210

Standard linear bushing KBM-12-DD, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€28.04