BRTM12-90-501

€194.93

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1001847

Manufacturer: Durbal

Weight: 0.11 kg

Product information "BRTM12-90-501"

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male right hand thread, full complement design, with shields on both sides, relubricatable, Durbal

Bore diameter:	12
Outer diameter:	32
Width:	16
Height:	70
Sealing:	cover shields on both sides
Thread type:	male thread right
Thread size:	M10
Cage:	full-complement
Material:	сorrosion-resistant

Alternative articles to "BRTM12-90-501"*

KA20202-ZZ-V-NR

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

We update the catalogues and catalogue extracts regularly, but we cannot guarantee that the latest version is available on our website. The latest catalogues can be found on the manufacturers' websites. You will often be able to view the items you are looking for individually with all the technical details, which is also our recommendation.

Heavy-Duty Rod Ends BRTM-NIRO-VR - Premium Line - Durbal
Rod Ends & Spherical-Plain Bearings - Durbal - Product Catalogue

Similar products

Sold out

FRL32-EU-NX

Corrosion-resistant floating guide roller FRL..-EU, with double row angular contact ball bearing, light convex raceway side, concentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

€155.55

Details

PAW18-P200 - 2500x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€4,756.05

EF12-60-501

Heavy-duty rod end EF.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, female right hand thread, maintenance-free, Durbal

€38.17

KBS20-PP-AS

Linear ball bearing KBS.. for shaft guidance systems, machined range, slotted design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA

€38.24

Sold out

FRR32-AZ

Guide roller FRR..AZ, special rollers, pin with through-hole in inner ring, two separate modified ball bearings, eccentric, with NBR seals type RS on both sides, Nadella

Price on request

BEFN10-20-502

Heavy-duty rod end BEFN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, female left hand thread, zinc plated, relubricatable, Durbal

€19.93

Sold out

52202

Axial deep groove ball bearing 522.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€29.12

Details

Sold out

FGL1232-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, without seals, Nadella

€58.64

Details

EFN10-20-502

Heavy-duty rod end EFN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, female left hand thread, zinc plated, relubricatable, Durbal

€17.95

201-XL-NPP-B

Self-aligning deep groove ball bearing 2..-NPP-B, radial insert ball bearing with spherical outside surface of the outer ring, cylindrical bore for fit, compensating for misalignment, sealed on both sides, with plastic cage, INA

€15.98

Sold out

PFPL32

Cam follower PFPL.., with reinforced smooth stud design, with cylindrical outer ring, seals on both sides, Nadella

€90.86

Details

KRE32-PP

Eccentric track roller with solid roller stud, with cage-guided needles and profiled outer ring (contact optimized surface), with hexagon socket, seals on both sides, IDC

€40.47

Sold out

GR12-1200

Single guide rail GR12.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 50mm start and end distances and 100mm intermediate distances, Rosa Sistemi

€1,035.26

Details

NB243216

Needle roller bearing with double-side ribs, single row, without inner ring, with lubrication groove an bore, NRB

€4.50

E208-R-ZZ

Profiled guide roller E..-ZZ with pin, double row bearing, eccentric, steel shields on both sides, incl. lock washer and nuts, CTS

€27.32