CLK110 9x16

Bore diameter:	9
Outer diameter:	16
Width:	26
Thread size:	M4
T (Nm):	37
F (kN):	8
Material:	standard

CPA18-2Z

Roller with pin CPA.., eccentric, prismatic surface, suitable for sliders CS.., CD.., NS.., ND.. of the Compact Rail, for use on T- and U-rails, lubricated for life, steel shielded on both sides, Rollon

€22.40

KRV16-X-PP-A

Stud type track roller KRV..X without eccentric, outer ring with cylindrical profile, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€30.87

TLV18-0480

Fixed bearing rail TLV18, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€78.26

Sold out

LFE05-0,5-RB

Corrosion-resistant eccentric bolt LFE.. with washer and nut for track rollers LFR.., accessories for completing track roller guidance systems, made of high-strength screw steel, INA

€32.87

Details

TLV18-1120

Fixed bearing rail TLV18, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€182.84

Sold out

GR3-075

Single guide rail GR3.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 12,5mm start and end distances and 25mm intermediate distances, Rosa Sistemi

€48.66

Details

TLV18-1760

Fixed bearing rail TLV18, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€286.65

Sold out

GR3-275

Single guide rail GR3.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 12,5mm start and end distances and 25mm intermediate distances, Rosa Sistemi

€160.69

Details

ULV18-0480

Floating bearing rail ULV18, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€78.26

GR3-150-D-AA3-21

Linear unit GR3..-AA3.., cross roller guideways, two 150mm long guide rails and roller cage made of steel sheet with 21 cylindrical rollers, fixing holes with 12.5mm start and end spacing and 25mm intermediate spacing, Rosa Sistemi

€184.53

ULV18-1120

Floating bearing rail ULV18, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€182.84

GR3-275-D-AA3-38

Linear unit GR3..-AA3.., cross roller guideways, two 275mm long guide rails and roller cage made of steel sheet with 38 cylindrical rollers, fixing holes with 12.5mm start and end spacing and 25mm intermediate spacing, Rosa Sistemi

€335.76

ULV18-1760

Floating bearing rail ULV18, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€286.65

V3-225

Single slide rail V3.., linear sliding guideways, made of special alloy steel, 90° V-profile, smooth running surfaces without antifriction material, mounting holes with 12.5mm start and end distances and 25mm intermediate distances, Rosa Sistemi

€199.75

ULC18-0480

Floating bearing rail ULC18, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€78.26

Ringfeder - RfN 7110
Bikon - Bikon 8000
Tollok - TLK 110
KTR - KTR 250
Ringspann - RLK 110

Product information "CLK110 9x16"