CLK130 85x125

€76.60

Ready for dispatch within 3-5 working days: 99

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1065773

Manufacturer: CMT Line

Weight: 2.6 kg

Product information "CLK130 85x125"

High-quality internal clamping set CLK130, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for high torques, CMT Line

Bore diameter:	85
Outer diameter:	125
Width:	61
Thread size:	M10
T (Nm):	11400
F (kN):	270
Material:	standard

Alternative articles to "CLK130 85x125"*

Ringfeder - TI 9013 A
Bikon - Bikon 7000 A
Tollok - TLK 130
KTR - KTR 200
Ringspann - RLK 130

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

Sold out

FG70125-EEM-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, metal shielded, Nadella

€772.63

Details

PAP12060-P10 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€340.75

Sold out

ESPA205

Self aligning bearing unit with radial insert ball bearing ES2.. with eccentric locking collar and shielded on both sides, pillow block PA2.. made of cast, SNR

€19.40

Details

NUP214-E-XL-TVP2-C3

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with solid plastic cage, FAG

€98.20

Sold out

BRTM10-30-502

Heavy-duty rod end BRTM.. with integral self-aligning roller bearing, series K, male left hand thread, full complement design, galvanized, with shields on both sides, relubricatable, Durbal

€97.44

Details

Sold out

32016-X-H

Tapered roller bearing 320.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€56.79

Details

22214-E1A-XL-M

Spherical roller bearing, double row, 222..-E1A series, cylindrical bore, with brass cage, groove and lubrication holes on outer ring, FAG

€152.05

CLK133 95x135

High-quality internal clamping set CLK133, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting without axial hub displacement, for medium to high torques, CMT Line

€85.20

M12-500

Single slide rail M12.., linear sliding guideways, made of special alloy steel, 90° M-profile, running surfaces coated with antifriction material, mounting holes with 50mm start and end distances and 100mm intermediate distances, Rosa Sistemi

€648.76

NNC4918-V

Double row cylindrical roller bearing, locating bearing, three fixed ribs on inner ring, two fixed ribs on outer ring (axial center split), full complement rolling set, IDC

€169.99

NU2214-E-XL-TVP2-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with plastic cage, FAG

€88.81

Sold out

7214-B-XL-JP-UO

Angular contact ball bearing 72..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG

€112.16

Details

B7016-C-T-P4S-UL

Super precision angular contact ball bearing (spindle bearing), contact angle α = 15°, universal design, APA

€121.28

CLK200 85x125

High-quality internal clamping set CLK200, backlash-free shaft-hub connection, non-self-centering design: radial standard height - axial short width, mounting without axial hub displacement, for medium to high torques, CMT Line

€55.20

Sold out

GR12-800

Single guide rail GR12.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 50mm start and end distances and 100mm intermediate distances, Rosa Sistemi

€653.06

Details