CLK131 38x65

Bore diameter:	38
Outer diameter:	65
Width:	42
Thread size:	M6
T (Nm):	820
F (kN):	43
Material:	standard

CLK500 22x55

Rigid shaft coupling CLK500, backlash-free, bending and torsionally stiff shaft-to-shaft connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

€28.16

ULV35-3200

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€774.05

KR16-X

Stud type track roller KR..X without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with cylindrical profile, gap seals on both sides, INA

€28.99

PAP6060-P20 - 100x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€1,200.09

FR32-EU-AS

Euroroller FR..-EU-AS with double row angular contact ball bearing, pin with internal thread in inner ring, concentric, with NBR seals type RS on both sides, Nadella

€83.69

ULV35-2800

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€683.35

3810-2RS

Double row angular contact ball bearing 38.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA

€51.37

PAP6070-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€2,065.40

Sold out

RKUR65-NX

Corrosion-resistant guide roller RKUR.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€446.61

Details

Sold out

NSW43-N-3-2RS

NSW-Slider, Compact Rail, robust design, nickel-plated steel body with three prismatic roller bearings -2RS sealed, wipers on both ends, for use in T- and U-rails, Rollon

€431.76

Details

DGIR06-UK

Standard rod end DGIR..-UK with pressed spherical plain bearing, sliding pair steel-PTFE, series E, female right hand thread, zinc plated, maintenance-free, Durbal

€6.02

Sold out

GR6-400

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€218.28

Details

PAP6040-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€945.22

Sold out

C3RAL35.10.115-NX

Carriage C3RAL.., anodized aluminum body with mounting holes (thread), three corrosion-resistant RAL.. guide rollers with ball bearings, suitable for LM.. guide rails, Nadella

€411.23

Details

Sold out

NSW35-Y-6-2RS-B

NSW-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy), with six prismatic roller bearings -2RS sealed in configuration B, wipers on both ends, for use in T- and U-rails, Rollon

€661.75

Details

Ringfeder - TI 9013 B
Bikon - Bikon 7000 B
Tollok - TLK 131
KTR - KTR 201
Ringspann - RLK 131

Product information "CLK131 38x65"