CLK131 75x115

€79.80

Ready for dispatch within 3-5 working days: 75

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1065894

Manufacturer: CMT Line

Weight: 2.4 kg

Product information "CLK131 75x115"

High-quality internal clamping set CLK131, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for high torques, CMT Line

Bore diameter:	75
Outer diameter:	115
Width:	61
Thread size:	M10
T (Nm):	5000
F (kN):	130
Material:	standard

Alternative articles to "CLK131 75x115"*

Ringfeder - TI 9013 B
Bikon - Bikon 7000 B
Tollok - TLK 131
KTR - KTR 201
Ringspann - RLK 131

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

BEM10-60-501

Heavy-duty rod end BEM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, male right hand thread, maintenance-free, Durbal

€29.31

NKI85/36-XL

Needle roller bearing NKI.., light series, open single row design, ribs on outer ring, with inner ring, steel cage, INA

€134.43

EM10-60-502

Heavy-duty rod end EM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, male left hand thread, maintenance-free, Durbal

€35.72

6015-C3

Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€32.72

BEMN10-80-502

Heavy-duty rod end BEMN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, male left hand thread, relubricatable, Durbal

€32.58

Sold out

K89313-TV/0-8

Axial cylindrical roller and cage assembly K893.., axial cylindrical roller bearings, double row, single direction, for combination with axial bearing washers GS893.. and WS893.., plastic cage, INA

€65.59

Details

EFN10-20-502

Heavy-duty rod end EFN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, female left hand thread, zinc plated, relubricatable, Durbal

€17.95

52216

Axial deep groove ball bearing 522.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€149.49

NCF3015-V

Single row cylindrical roller bearing, support bearing, two fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC

€122.41

LFZ12

Centric bolt LFZ.. with washer for track rollers LFR.., accessories for completing track roller guidance systems, made of high-strength screw steel, INA

€4.50

C210-ZZ

Profiled guide roller C..-ZZ with pin, double row bearing, concentric, steel shields on both sides, incl. lock washer and nuts, CTS

€29.14

Sold out

GR12-200

Single guide rail GR12.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 50mm start and end distances and 100mm intermediate distances, Rosa Sistemi

€221.69

Details

E210-INOX-2RS

Corrosion-resistant profiled guide roller E..-2RS with pin, double row bearing, eccentric, seals on both sides, incl. lock washer and nuts, CTS

€48.04

Sold out

GR12-1000

€838.53

Details

Sold out

EXPA204

Self aligning bearing unit with radial insert ball bearing EX2.. with eccentric locking collar and shielded on both sides, pillow block PA2.. made of cast, SNR

€19.01

Details