CLK133 170x225

€226.60

Ready for dispatch within 3-5 working days: 18

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066249

Manufacturer: CMT Line

Weight: 6.5 kg

Product information "CLK133 170x225"

High-quality internal clamping set CLK133, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting without axial hub displacement, for medium to high torques, CMT Line

Bore diameter:	170
Outer diameter:	225
Width:	64
Thread size:	M14
T (Nm):	33200
F (kN):	391
Material:	standard

Alternative articles to "CLK133 170x225"*

Ringfeder - RfN 7013.1
Bikon - Bikon 1006
Tollok - TLK 133
KTR - KTR 206
Ringspann - RLK 133

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

6030-M-C4

Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with solid brass cage, open and not greased, FAG

€361.97

DPOS14

Standard rod end DPOS.. with pressed spherical plain bearing, sliding pair steel-brass, series K, male right hand thread, zinc plated, relubricatable, Durbal

€9.91

51232-MP

Axial deep groove ball bearing 512..-MP, single direction, flat housing locating washer (non-angle-adjustable), open, separable, with brass cage, without lubricant, FAG

€477.28

BRF14-00-501

Heavy-duty rod end BRF.. with integral self-aligning roller bearing, series K, female right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€58.80

NJ418-XL-M1

Single row cylindrical roller bearing NJ4.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€942.85

EF15-60-501

Heavy-duty rod end EF.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, female right hand thread, maintenance-free, Durbal

€65.85

PAP220100-P180 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€124.43

EFN15-30-501

Heavy-duty rod end EFN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, female right hand thread, zinc plated, relubricatable, with lip seals on both sides, Durbal

€29.60

NNF5030-PP

Double row cylindrical roller bearing, locating bearing, three fixed ribs on inner ring, one fixed center rib on outer ring, full complement roller set, sealed on both sides, IDC

€840.71

Sold out

UCPA207

Self aligning bearing unit with radial insert ball bearing UC2.. with socket set screws and shielded on both sides, pillow block PA2.. housing made of cast, SNR

€33.40

Details

CLK200 190x250

High-quality internal clamping set CLK200, backlash-free shaft-hub connection, non-self-centering design: radial standard height - axial short width, mounting without axial hub displacement, for medium to high torques, CMT Line

€254.60

CLK131 150x200

High-quality internal clamping set CLK131, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for high torques, CMT Line

€214.56

CLK401 180x235

High-quality internal clamping set CLK401, backlash-free shaft-hub connection, self-centering design: radial standard height - axially medium lenght, mounting without axial hub displacement, for very high torques, CMT Line

€474.00

Sold out

23128-E1-XL-K-TVPB-C3

Spherical roller bearing, double row, 231..-E1-K series, tapered bore, with plastic cage, groove and lubrication holes on outer ring, FAG

€441.06

Details

23030-E1A-XL-K-M-C3

Spherical roller bearing, double row, 230..-E1A-K series, tapered bore, with brass cage, groove and lubrication holes on outer ring, FAG

€404.64