CLK133 35x60

€18.68

Ready for dispatch within 3-5 working days: 509

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066201

Manufacturer: CMT Line

Weight: 0.4 kg

Product information "CLK133 35x60"

High-quality internal clamping set CLK133, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting without axial hub displacement, for medium to high torques, CMT Line

Bore diameter:	35
Outer diameter:	60
Width:	28
Thread size:	M6
T (Nm):	760
F (kN):	43
Material:	standard

Alternative articles to "CLK133 35x60"*

Ringfeder - RfN 7013.1
Bikon - Bikon 1006
Tollok - TLK 133
KTR - KTR 206
Ringspann - RLK 133

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

Sold out

FR32-EU-AS-NX

Corrosion-resistant Euroroller FR..-EU-AS with double row angular contact ball bearing, pin with internal thread in inner ring, concentric, with NBR seals type RS on both sides, Nadella

€185.72

Details

NSDA43-3-2Z-A

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with three crowned roller bearings -2Z shielded, for use in K-rails, Rollon

€224.84

Sold out

GR6-1100

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€719.37

Details

C3RCL35.10.115

Carriage C3RCL.., anodized aluminum body with mounting holes (thread), three RCL.. guide rollers with ball bearings, suitable for LM.. guide rails, Nadella

€193.49

NSDA35-Y-3-2RS-A

NSDA-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy),, for mounting parallel to the load direction - configuration A, with three crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€402.52

GR6-100-D-AA6-5

Linear unit GR6..-AA6.., cross roller guideways, two 100mm long guide rails and roller cage made of steel sheet with 5 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€148.25

Sold out

C4RAL35.10.152

Carriage C4RAL.., anodized aluminum body with mounting holes (thread), four RAL.. guide rollers with ball bearings, suitable for LM.. guide rails, Nadella

€324.66

Details

NSDA35-3-2RS-A

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with three crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€223.57

DSAL06-T/K

Standard rod end DSAL..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, male left hand thread, zinc plated, maintenance-free, Durbal

€5.40

GR6-900-D-AA6-52

Linear unit GR6..-AA6.., cross roller guideways, two 900mm long guide rails and roller cage made of steel sheet with 52 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€996.51

Sold out

PFV60

Ball bearing guide roller PFV.., version with 120° running groove, flat raceway side, concentric, with NBR seals type RS on both sides, incl. lock washer and nut, Nadella

€113.59

Details

CRPA43-2Z

Roller with pin CRPA.., eccentric, crowned outer ring, suitable for sliders CS.., CD.., NS.., ND.. of the Compact Rail, for use on K-rails, lubricated for life, steel shielded on both sides, Rollon

€35.13

DGIL06-UK

Standard rod end DGIL..-UK with pressed spherical plain bearing, sliding pair steel-PTFE, series E, female left hand thread, zinc plated, maintenance-free, Durbal

€6.02

V6-250

Single slide rail V6.., linear sliding guideways, made of special alloy steel, 90° V-profile, smooth running surfaces without antifriction material, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€181.26

CPA43-2Z

Roller with pin CPA.., eccentric, prismatic surface, suitable for sliders CS.., CD.., NS.., ND.. of the Compact Rail, for use on T- and U-rails, lubricated for life, steel shielded on both sides, Rollon

€35.13