CLK133 65x95

€36.90

Ready for dispatch within 3-5 working days: 516

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066226

Manufacturer: CMT Line

Weight: 0.9 kg

Product information "CLK133 65x95"

High-quality internal clamping set CLK133, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting without axial hub displacement, for medium to high torques, CMT Line

Bore diameter:	65
Outer diameter:	95
Width:	33,5
Thread size:	M8
T (Nm):	2600
F (kN):	80
Material:	standard

Alternative articles to "CLK133 65x95"*

Ringfeder - RfN 7013.1
Bikon - Bikon 1006
Tollok - TLK 133
KTR - KTR 206
Ringspann - RLK 133

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

NNCF5012-V-C3

Double row cylindrical roller bearing, support bearing, three fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC

€146.61

TLC43-3200

Fixed bearing rail TLC43, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€864.54

Sold out

CSK43-230-2Z-A

Slider type CSK, Compact Rail linear guides, zinc-plated steel body with six crowned rollers -2Z shielded, in configuration A, without wipers, for use in K-rails, Rollon

€320.77

Details

NKE43-3-2Z

N-Slider, Compact Rail, with a closed chemically nickel-plated die-cast aluminum housing, three crowned roller bearings -2Z shielded, end caps with wipers and lubricator on both ends, for use in K-rails, Rollon

€191.24

Sold out

T4R35-FRN32EI-140

Steering carriage T4R..-FRN.. for curved guideways, circular systems, table top with four FRN.. needle guide rollers in fixed positions, suitable for FS..M guide rails, Nadella

Price on request

52212

Axial deep groove ball bearing 522.., double direction based on two ball and cage assemblies, two flat housing locating washers (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€91.08

KLV63-2960

Compensation bearing rail KLV63, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€1,684.06

Sold out

BSTU3590-LLX-GN-P42U-L588

High precision bearing for ball screws, double row axial angular contact ball bearing, with light contact seals on both sides, NTN

Price on request

KLC43-1200

Compensation bearing rail KLC43, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€324.67

Sold out

CSWK43-150-2RS-B

Slider type CSWK, Compact Rail linear guides, zinc-plated steel body with four crowned rollers -2RS sealed, in configuration B, WK wipers on both ends, for use in K-rails, Rollon

€263.51

Details

NKE43L-5-2Z-B

N-Slider, Compact Rail, with a closed chemically nickel-plated die-cast aluminum housing, long, five crowned roller bearings -2Z shielded in configuration B, end caps with wipers and lubricator on both ends, for use in K-rails, Rollon

€309.99

KR19-EE

Stud type track roller, with axial guidance, concentric, sealed on both sides with plastic axial plain washers, NRB

€10.08

Sold out

RKUR95-NX-V

Corrosion-resistant guide roller RKUR.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, eccentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€1,141.17

Details

KLV63-0800

€455.28

CLK200 48x80

High-quality internal clamping set CLK200, backlash-free shaft-hub connection, non-self-centering design: radial standard height - axial short width, mounting without axial hub displacement, for medium to high torques, CMT Line

€24.02