CLK139 28x50

€27.84

Ready for dispatch within 3-5 working days: 47

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066560

Manufacturer: CMT Line

Weight: 0.2 kg

Product information "CLK139 28x50"

High-quality internal clamping set CLK139, backlash-free shaft-hub connection, self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

Bore diameter:	28
Outer diameter:	50
Width:	18
Thread size:	M6
T (Nm):	420
F (kN):	36
Material:	standard

Alternative articles to "CLK139 28x50"*

Ringfeder - TI 9009 - 7008
Bikon - Bikon 4500
Tollok - TLK 139

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

Sold out

WLK20-60-500

Heavy-duty spherical bearing WLK.. with integral self-aligning ball bearing, full complement design, stainless steel, with long-term greasing and shields on both sides, Durbal

€198.02

Details

Sold out

GR6-850

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€483.26

Details

PFVR50.25

Ball bearing guide roller PFVR.., version with "gothic arch" profile, eccentric, with NBR seals type RS on both sides, incl. lock washer and nut, Nadella

€108.66

NSDA43-5-2Z-A

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with five crowned roller bearings -2Z shielded, for use in K-rails, Rollon

€340.81

BEF20-60-502

Heavy-duty rod end BEF.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female left hand thread, maintenance-free, Durbal

€81.24

GR6-700-D-AA6-40

Linear unit GR6..-AA6.., cross roller guideways, two 700mm long guide rails and roller cage made of steel sheet with 40 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€712.11

CPN63-2ZR

Roller with pin CPN.., concentric, prismatic surface, suitable for sliders CS.., CD.., NS.., ND.. of the Compact Rail, for use on T- and U-rails, lubricated for life, steel shielded on both sides, Rollon

€61.33

NSDA43-3-2RS-A

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with three crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€264.96

BEMN20-80-502

Heavy-duty rod end BEMN.. in stainless steel, with pressed spherical-plain bearing, sliding pair steel-brass, series K, male left hand thread, relubricatable, Durbal

€93.41

V6-500

Single slide rail V6.., linear sliding guideways, made of special alloy steel, 90° V-profile, smooth running surfaces without antifriction material, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€466.40

ULC35-0880

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€224.56

Sold out

CRAX43-2RS

Corrosion-resistant roller with pin CRAX.., eccentric, crowned outer ring, suitable for sliders CS.., CD.., NS.., ND.. of the Compact Rail, for use on K-rails, lubricated for life, 2RS sealed, Rollon

€73.12

Details

BEM20-31-501-BOK-20

Heavy-duty rod end, special version, with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, male right hand thread, threated bolt pressed in and caulked to joint ball, Durbal

Price on request

MV6-400

Linear unit MV6.., linear sliding guideways, made of special alloy steel, with 90° profile, M6 guide rail running surfaces coated with antifriction material, smooth V6 guide rail, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€710.14

ULC35-2160

€527.41