CLK139 35x57

€30.86

Ready for dispatch within 3-5 working days: 136

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066563

Manufacturer: CMT Line

Weight: 0.3 kg

Product information "CLK139 35x57"

High-quality internal clamping set CLK139, backlash-free shaft-hub connection, self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

Bore diameter:	35
Outer diameter:	57
Width:	22
Thread size:	M6
T (Nm):	700
F (kN):	36
Material:	standard

Alternative articles to "CLK139 35x57"*

Ringfeder - TI 9009 - 7008
Bikon - Bikon 4500
Tollok - TLK 139

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

CLK139 20x42

€24.80

TLV35-3120

Fixed bearing rail TLV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€761.26

E420-ZZ

Profiled guide roller E..-ZZ with pin, double row bearing, eccentric, steel shields on both sides, incl. lock washer and nuts, CTS

€47.14

GR6-350-D-AA6-20

Linear unit GR6..-AA6.., cross roller guideways, two 350mm long guide rails and roller cage made of steel sheet with 20 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€351.21

TLC35-2240

Fixed bearing rail TLC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€546.70

CDW35-150-2Z-A-U

CDW-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration A, with five prismatic roller bearings -2Z shielded, for use in U-rails, Rollon

€285.15

NSW35-3-2Z

NSW-Slider, Compact Rail, robust design made of zinc plated steel, with three prismatic roller bearings -2Z shielded, wipers on both ends, for use in T- and U-rails, Rollon

€197.11

ULV35-1520

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€385.73

CLK132 30x55

High-quality internal clamping set CLK132, backlash-free shaft-hub connection, self-centering design: radial standard height - short axial width, mounting with axial hub displacement, for high torques, for medium to high torques, CMT Line

€17.20

Sold out

CSW35-N-120-2RS-A-T

Slider type CSW, Compact Rail linear guides, nickel-plated steel body with four prismatic rollers -2RS sealed, in configuration A, WT wipers on both ends, for use in T-rails, Rollon

€421.45

Details

BEM06-60-501

Heavy-duty rod end BEM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, male right hand thread, maintenance-free, Durbal

€24.42

Sold out

GR6-350

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€184.84

Details

Sold out

NSD43-5-2RS-B

NSD-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with five prismatic roller bearings -2RS sealed, wipers on both ends, for use in T- and U-rails, Rollon

€385.62

Details

NSDA35-Y-5-2RS-B

NSDA-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy), for mounting parallel to the load direction - configuration B, with five crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€615.79

CLK603 68x115

External clamping set (shrink disc) CLK603 - standard series, three-part design, backlash-free shaft-hub connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

€57.80