CLK250L 17x25

Bore diameter:	17
Outer diameter:	25
Width:	18
Lenght:	31
T (Nm):	113
F (kN):	12
Material:	standard

PFV25.10-NX

Corrosion-resistant ball bearing guide roller PFV.., version with "gothic arch" profile, concentric, with NBR seals type RS on both sides, incl. lock washer and nut, Nadella

€169.36

Sold out

HN2

Hook spanner, HN series, for tightening and loosening shaft nuts on shafts, withdrawal sleeves and adapter sleeves, BGL

€21.93

Details

R066801600

Segmental linear bushing KBSE-16, linear bushings, closed design with reinforced plastic housing, hardened steel segments, balls made of bearing steel, guide cage and retaining rings made of PA11, without wiper selas, without grease, Rexroth

€13.37

IR20X25X20,5-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€5.45

IR20X25X30-IS1-XL

Inner ring IR..-IS for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, with lubrication hole, INA

€16.76

K21X25X13-A/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€4.36

LR20X25X38,5

Inner ring LR... for needle roller bearings, cylindrical, made of hardened bearing steel, raceway ground, with chamfers on the end faces, without lubrication hole, INA

€18.24

PAP2225-P10 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€204.89

PAP2230-P10 - 5000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€8,081.78

PAP2230-P10 - 1x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

Price on request

PAP2215-P11 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€2,186.73

PAP2225-P11 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€104.50

PAP2220-P200 - 2500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€5,105.10

PAP2220-P20 - 5000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€8,535.15

PAP2215-P180 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€3,111.23

Bikon - Bikon 5500 S
Tollok - TLK 250 L
KTR - KTR 125.1
Ringspann - RLK 250 L

Product information "CLK250L 17x25"