CLK250L 28x40

€16.76

Ready for dispatch within 3-5 working days: 41

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066535

Manufacturer: CMT Line

Weight: 0.35 kg

Product information "CLK250L 28x40"

High-quality internal clamping set CLK250L, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting with axial hub displacement, for low to medium torques, CMT Line

Bore diameter:	28
Outer diameter:	40
Width:	22
Lenght:	35
T (Nm):	460
F (kN):	40
Material:	standard

Alternative articles to "CLK250L 28x40"*

Bikon - Bikon 5500 S
Tollok - TLK 250 L
KTR - KTR 125.1
Ringspann - RLK 250 L

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

3203-BD-XL-2Z-TVH-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, with plastic cage, steel shields on both sides, FAG

€23.69

US203-G2

Bearing insert US2.. for bearing units, spherical outer ring, fixing by socket set screw, shielded on both sides, SNR

€7.20

1203-TVH

Self-aligning ball bearing 12.., double row radial ball bearings, cylindrical bore, open, with plastic cage, not greased, FAG

€14.68

CSK17-P - UKC17-ZZ

Sprag type freewheel UKC.., ball bearing freewheels, dimensions according to ball bearing 62.., self-centering, one keyway on the inner ring, shielded on both sides, operating temperature -10°C to +60°C, CTS

€31.30

NU2203-E-XL-TVP2-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with plastic cage, FAG

€22.02

GCR40-EE-SW

Full complement single row track roller GCR.. with threaded stud, profiled outer ring with optimized radius, eccentric, with plastic seals, incl. lock washer and nut, Nadella

€152.82

GAY12-XL-NPP-B

Radial insert ball bearing GAY.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, lip seals on both sides, with plastic cage, relubricatable, INA

€12.67

Sold out

FRR40-EU-AZ

Euroroller FRR..-EU-AZ with double row angular contact ball bearing, pin with through-hole in inner ring, light convex raceway side, eccentric, with NBR seals type RS on both sides, Nadella

€118.21

Details

RAE17-XL-NPP-B

Radial insert ball bearing RAE.., spherical outside surface of the outer ring, with eccentric locking collar for mounting on shaft, compensating for misalignment, sealed on both sides, with plastic cage, not relubricatable, INA

€14.68

Sold out

FRNR40-EI-NX

Corrosion-resistant guide roller FRNR..-EI with needle roller bearing, with threaded stud, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€441.89

Details

ROTEX 19 ST - MatNr: 020195101100

ROTEX 19 ST hub 1.0 Ø11H7 key DIN 6885/1-JS9 > component 1a - #020195101100, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€18.38

NB304020

Needle roller bearing with double-side ribs, single row, without inner ring, with lubrication groove an bore, NRB

€6.51

ROTEX 19 ST - MatNr: 020195101200

ROTEX 19 ST hub 1.0 Ø12H7 key DIN 6885/1-JS9 > component 1a - #020195101200, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€18.38

7203-B-XL-JP

Angular contact ball bearing 72..-B-JP, single-row, contact angle α = 40°, with sheet steel cage, open - without seals, not greased, FAG

€13.93

ROTEX 19 ST - MatNr: 020195112400

ROTEX 19 ST hub 1.0 Ø24H7 key DIN 6885/1-JS9 > component 1b - #020195112400, torsionally flexible compact claw coupling Rotex® Standard, shaft-shaft connection, KTR

€21.49