CLK300 15x19

€3.90

Ready for dispatch within 3-5 working days: 1494

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1065683

Manufacturer: CMT Line

Weight: 0.0053 kg

Product information "CLK300 15x19"

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

Bore diameter:	15
Outer diameter:	19
Width:	6,3
T (Nm):	25
F (kN):	3
Material:	standard

Alternative articles to "CLK300 15x19"*

Ringfeder - RfN 8006
Bikon - Bikon 5000
Tollok - TLK 300
KTR - KTR 150
Ringspann - RLK 300

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

NATV6-X-PP-A

Yoke type track roller NATV.., single row, thick-walled outer ring with cylindrical surface, axial guidance via thrust washers, with inner ring, full complement, three-stage sealing on both sides, INA

€19.74

GLE10-20-500

Heavy-duty spherical-plain bearing GLE.., sliding combination steel - DURBAL-Glide (polyamid-PTFE-fibreglass-compound), series E, maintenance-free, Durbal

€20.22

Sold out

R065825134

eLINE ball bushing KBC-12-DD-RT-NR-G, ball bushing guides, stainless material, POM ball retainer, reduced radial internal clearance, wiper seals integrated on both sides, with grease, Rexroth

€25.74

Details

61800-2Z-HLC

Single row deep groove ball bearing 618.., radial, with steel cage and sheet steel shields on both sides, FAG

€7.76

607-CO7

Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€1.60

Sold out

BBE10-A-UU

Closed standard ball bushing (linear ball bearing), standard, steel cage, seals on both sides, SNR

€16.96

Details

Sold out

GCL19-SW.1

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

€88.11

Details

Sold out

GCL19-EE-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, with plastic seals, incl. lock washer and nut, Nadella

€67.36

Details

KRE19

Stud type track roller KRE.. with eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, INA

€37.42

KRE19-PP

Eccentric track roller with solid roller stud, with cage-guided needles, outer ring with crowned profile R500, with screw driver slot, seals on both sides, IDC

€30.06

GR12X19X3-C

Single-lip sealing ring GR.., contacting radial rotary shaft seals, for sealing needle roller bearings, NBR elastomer with external steel reinforcement, INA

€3.01

HK1312-B

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row non-sealed design, with steel cage, without lubrication hole, INA

€3.13

Sold out

R060231010

Standard linear bushing KBM-10-DD, linear bushings, closed robust all-metal design, hardened and ground sleeve, guide cage made of PA/POM, with two integrated wiper seals, ungreased, Rexroth

€26.00

Details

Sold out

R065801256

Compact ball bushing KBC-12, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, without wiper seals, without grease, Rexroth

€10.41

Details

Sold out

FRNR19

Special guide roller FRNR.. with needle roller bearing, raceway with O-ring, slighly convex raceway sides, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€103.74

Details