CLK300 35x40

€4.10

Ready for dispatch within 3-5 working days: 2500

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1065689

Manufacturer: CMT Line

Weight: 0.02 kg

Product information "CLK300 35x40"

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

Bore diameter:	35
Outer diameter:	40
Width:	7
T (Nm):	160
F (kN):	9
Material:	standard

Alternative articles to "CLK300 35x40"*

Ringfeder - RfN 8006
Bikon - Bikon 5000
Tollok - TLK 300
KTR - KTR 150
Ringspann - RLK 300

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

RSTO17

Yoke type track roller RSTO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, without inner ring, with needle roller and cage assembly (steel cage), without axial guidance, open, not self-retaining, INA

€24.23

Sold out

KRV40

Full complement stud type track roller, profiled outer ring (contact optimized surface), with hexagon socket, without seals, IDC

€42.86

Details

Sold out

R061202556

Standard linear bushing KBM-E-25-DD, linear bushings, closed robust all-metal design, hardened and ground sleeve, adjustable radial clearance, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€49.74

Details

KRE40-PP-A-NMT

Stud type track roller KRE.. with eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€71.56

NUTR17-X

Yoke type track roller with cylindrical outer ring, inner ring and flange rings, full complement roller set, labyrinth seals on both sides, IDC

€34.69

Sold out

R073012540

Super linear bushing KBSH-25-D for very high loads, with misalignment compensation, linear bushings, closed design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

€135.63

Details

LR6003-2RSR-HLC

Single row track roller LR6.., deep groove ball bearing based, without pin, thick-walled outer ring with crowned lateral surface of R=500mm, with plastic cage, lip seals on both sides, INA

€21.51

KB25-PP-AS

Linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA

€45.58

Sold out

KSO25

Linear ball bearing KS.. for shaft guidance systems, heavy-duty series, open design - segment cut-out, angle-adjustable, without seals, relubricatable, INA

€40.72

Details

Sold out

BBE25-UU

Closed standard ball bushing (linear ball bearing), standard, plastic cage, seals on both sides, SNR

€24.74

Details

2203-TVH

Self-aligning ball bearing 22.., double row radial ball bearings, cylindrical bore, open, with plastic cage, not greased, FAG

€18.37

CSK17-2RS - UK17-2RS

Sprag type freewheel UK.., Ball bearing freewheels, dimensions according to ball bearing 62.., self-centering, sealed on both sides, without keyways, operating temperature -10°C to +60°C, CTS

€34.19

Sold out

NUP203-E-XL-M1A-C3

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with outer ring rib-guided two-piece brass cage, FAG

€51.55

Details

Sold out

GCRL40-EE-SW

Full complement single row track roller GCRL.. with threaded stud, with optimized cylindrical outer ring, eccentric, with plastic seals, incl. lock washer and nut, Nadella

Price on request

GAY17-XL-NPP-B

Radial insert ball bearing GAY.., spherical outer ring surface, grub screws in inner ring for location on shaft, compensating for misalignment, lip seals on both sides, with plastic cage, relubricatable, INA

€13.20