CLK300 42x48

€6.06

Ready for dispatch within 3-5 working days: 481

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1065692

Manufacturer: CMT Line

Weight: 0.03 kg

Product information "CLK300 42x48"

High-quality internal clamping set CLK300, backlash-free shaft-hub connection, non-self-centering design: radially flat - axially short, mounting with axial hub displacement, for low to medium torques, CMT Line

Bore diameter:	42
Outer diameter:	48
Width:	8
T (Nm):	260
F (kN):	12
Material:	standard

Alternative articles to "CLK300 42x48"*

Ringfeder - RfN 8006
Bikon - Bikon 5000
Tollok - TLK 300
KTR - KTR 150
Ringspann - RLK 300

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

PM17-00-501

Heavy-duty rod end PM.. with integral self-aligning ball bearing, male right hand thread, with shields on both sides, relubricatable, Durbal

€95.05

Sold out

PM17-01-501

Heavy-duty rod end PM.. with integral self-aligning ball bearing, fine male right hand thread, with shields on both sides, relubricatable, Durbal

€95.05

Details

PM17-00-502

Heavy-duty rod end PM.. with integral self-aligning ball bearing, male left hand thread, with shields on both sides, relubricatable, Durbal

€95.05

PM17-01-502

Heavy-duty rod end PM.. with integral self-aligning ball bearing, fine male left hand thread, with shields on both sides, relubricatable, Durbal

€95.05

PF20-00-501

Heavy-duty rod end PF.. with integral self-aligning ball bearing, female right hand thread, with shields on both sides, relubricatable, Durbal

€99.01

PF20-00-502

Heavy-duty rod end PF.. with integral self-aligning ball bearing, female left hand thread, with shields on both sides, relubricatable, Durbal

€99.01

Sold out

LF9

Adjusting nut LF.., spring nuts for precise adjustment, axial locking, standard clamping system with two clamping screws on one spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€94.80

Details

Sold out

LFE9

Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€164.98

Details

Sold out

ARZ103048

Axial roller bearing ARZ.. with cylindrical rollers, light series, axial cage with thick hardened thrust washers held by capsule ring, Nadella

€131.00

Details

AXZ83048

Axial needle roller bearing AXZ.., single-row axial cage with thick hardened thrust washers held by capsule ring, Nadella

Price on request

Sold out

DL4016

Full complement needle bush DL.., oped design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€26.56

Details

Sold out

DL4020

Full complement needle bush DL.., oped design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€22.82

Details

Sold out

DLF4020

Full complement needle bush DLF.., closed end design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€32.20

Details

G38X48X4-C

Single-lip sealing ring G.., contacting radial rotary shaft seals, for sealing needle roller bearings, NBR-coated stiffening ring with a rubber shaft profile, INA

€3.34

IR40X48X22-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€9.31