CLK500 18x50

€27.22

Ready for dispatch within 3-5 working days: 102

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066749

Manufacturer: CMT Line

Weight: 0.5 kg

Product information "CLK500 18x50"

Rigid shaft coupling CLK500, backlash-free, bending and torsionally stiff shaft-to-shaft connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

Bore diameter:	18
Outer diameter:	50
Width:	50
Thread size:	M6
T (Nm):	190
F (kN):	23
Material:	standard

Alternative articles to "CLK500 18x50"*

Ringfeder - RfN 7020
Bikon - Bikon 9500
Tollok - TLK 500
KTR - KTR 700
Ringspann - RLK 500

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

Sold out

FRR32-EU-AS-NX

Corrosion-resistant Euroroller FRR..-EU-AS with double row angular contact ball bearing, pin with internal thread in inner ring, eccentric, with NBR seals type RS on both sides, Nadella

€191.15

Details

TLV35-0400

Fixed bearing rail TLV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€102.61

CLK130 22x47

High-quality internal clamping set CLK130, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for high torques, CMT Line

€18.86

V6-350

Single slide rail V6.., linear sliding guideways, made of special alloy steel, 90° V-profile, smooth running surfaces without antifriction material, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€315.52

BEF06-60-501

Heavy-duty rod end BEF.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female right hand thread, maintenance-free, Durbal

€24.42

NKS35-XL

Needle roller bearing NKS.., heavy series, open single row design, ribs on outer ring, without inner ring, steel cage, INA

€25.68

Sold out

CDW35-N-150-2RS-B-U

CDW-Slider, Compact Rail, robust design with nickel-plated steel body, for mounting parallel to the load direction - configuration B, with five prismatic roller bearings -2RS sealed, wipers on both ends, for use in U-rails, Rollon

€602.05

Details

ULC35-1920

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€489.09

ULV35-2400

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€585.62

CLK350 38x65

High-quality internal clamping set CLK350, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for low to medium torques, CMT Line

€33.26

Sold out

CSW35-Y-180-2RS-A-T

Slider type CSW, Compact Rail linear guides, electrolytically galvanized and passivated steel body (Rollon Aloy), with six prismatic rollers -2RS sealed, in configuration A, WT wipers on both ends, for use in T-rails, Rollon

€616.44

Details

CLK200 40x65

High-quality internal clamping set CLK200, backlash-free shaft-hub connection, non-self-centering design: radial standard height - axial short width, mounting without axial hub displacement, for medium to high torques, CMT Line

€19.54

Sold out

GR6-650

Single guide rail GR6.., cross roller guides, made of alloyed special steel, through-hardened, 90° V-profile, running surfaces precision ground, fixing holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€355.58

Details

PAP4540-P180 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€10,350.11

BRTF20-90-502

Heavy-duty rod end BRTF.. in stainless steel, with integral self-aligning roller bearing, series K, female left hand thread, full complement design, with shields on both sides, relubricatable, Durbal

€268.01