CLK500 25x55

Bore diameter:	25
Outer diameter:	55
Width:	60
Thread size:	M6
T (Nm):	400
F (kN):	33
Material:	standard

EM06-60-501

Heavy-duty rod end EM.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, male right hand thread, maintenance-free, Durbal

€30.07

KR16-SK

Stud type track roller KR.. without eccentric, solid roller pin, needles cage-guided, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, INA

€30.26

PAP5025-P200 - 1000x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€7,062.51

B71907-C-T-P4S-UL

Super precision angular contact ball bearing B719..-C (spindle bearing), adjusted, contact angle α = 15°, restricted tolerances, open - without seals, universally combinable, FAG

€104.82

ULV35-3040

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€741.90

EFN06-20-501

Heavy-duty rod end EFN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, female right hand thread, zinc plated, relubricatable, Durbal

€15.44

KRV16-X-PP-A

Stud type track roller KRV..X without eccentric, outer ring with cylindrical profile, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€30.87

PAP5030-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€337.96

CPN43-2RS

Roller with pin CPN.., concentric, prismatic surface, suitable for sliders CS.., CD.., NS.., ND.. of the Compact Rail, for use on T- and U-rails, lubricated for life, 2RS sealed, Rollon

€40.57

ULV35-2000

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€491.78

NNCF5006-V-C3

Double row cylindrical roller bearing, support bearing, three fixed ribs on inner ring, one fixed rib on outer ring, retaining ring on ribless side, full complement rolling set, IDC

€70.09

AXW35

Axial needle roller bearing AXW.., housing with centring collar and needle cage AXK, single direction, steel cage, to combine with washer AS, needle roller bearings NK/NKI, NKS/NKIS, NA/RNA49, NA/RNA69 and drawn cup needle roller bearings HK/BK, INA

€5.98

PAP5020-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€4,384.97

ULC35-0880

Floating bearing rail ULC35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, C-fixing holes (for screws with low head) set as standard, Rollon

€224.56

ULV35-1600

Floating bearing rail ULV35, linear guideways with C-profile, Compact Rail, made from cold-drawn carbon steel, induction-hardened and ground raceways, zinc-plated, V-fixing holes set as standard (for countersunk head screws), Rollon

€407.68

Ringfeder - RfN 7020
Bikon - Bikon 9500
Tollok - TLK 500
KTR - KTR 700
Ringspann - RLK 500

Product information "CLK500 25x55"