CLK603 50x90

€46.80

Ready for dispatch within 3-5 working days: 664

Average lead time from new production (poss. with MOQ) in working days: 40-60

Product number: 1066822

Manufacturer: CMT Line

Weight: 0.8 kg

Product information "CLK603 50x90"

External clamping set (shrink disc) CLK603 - standard series, three-part design, backlash-free shaft-hub connection, self-centering design, mounting without axial hub displacement, for medium to high torques, CMT Line

Bore diameter:	50(38-40-42)
Outer diameter:	90
Width:	27
Thread size:	M6
T (Nm):	940-110-1300
F (kN):	79-85-90
Material:	standard

Alternative articles to "CLK603 50x90"*

Ringfeder - RfN 4071
Bikon - Bikon 1029 - 1029.1
Tollok - TLK 603
KTR - KTR 603
Ringspann - RLK 603

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

GR6-800-D-AA6-46

Linear unit GR6..-AA6.., cross roller guideways, two 800mm long guide rails and roller cage made of steel sheet with 46 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€832.96

Sold out

FKX90-C

Guide roller FKX.. with tapered roller bearing, convex raceway sides, inner ring with holes for fixing on the shaft, with NBR seals type RS on both sides, Nadella

€385.35

Details

NSDA35-5-2RS-B

NSDA-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with five crowned roller bearings -2RS sealed, wipers on both ends, for use in K-rails, Rollon

€342.08

GR6-150-D-AA6-8

Linear unit GR6..-AA6.., cross roller guideways, two 150mm long guide rails and roller cage made of steel sheet with 8 cylindrical rollers, fixing holes with 25mm start and end spacing and 50mm intermediate spacing, Rosa Sistemi

€185.16

V6-350

Single slide rail V6.., linear sliding guideways, made of special alloy steel, 90° V-profile, smooth running surfaces without antifriction material, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€315.52

Sold out

FK90-C

Floating guide roller FK.. with tapered roller bearing, inner ring with holes for fixing on the shaft, sealed on both sides, Nadella

€391.31

Details

Sold out

CDW35-100-2RS-B-T

CDW-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with three prismatic roller bearings -2RS sealed, without wipers, for use in T-rails, Rollon

€218.13

Details

61814-Y-C3

Single row deep groove ball bearing 618.., radial contact, with brass cage, open and not greased, FAG

€41.54

M6-300

Single slide rail M6.., linear sliding guideways, made of special alloy steel, 90° M-profile, running surfaces coated with antifriction material, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€271.07

Sold out

C4RCL35.10.152

Carriage C4RCL.., anodized aluminum body with mounting holes (thread), four RCL.. guide rollers with ball bearings, suitable for LM.. guide rails, Nadella

€275.30

Details

Sold out

CDW35-Y-100-2RS-A-U

CDW-Slider, Compact Rail, robust design, electrolytically galvanized and passivated steel body (Rollon Aloy), for mounting parallel to the load direction - configuration A, with three prismatic roller bearings -2RS sealed, wipers on both ends, for use in U-rails, Rollon

€402.13

Details

MV6-250

Linear unit MV6.., linear sliding guideways, made of special alloy steel, with 90° profile, M6 guide rail running surfaces coated with antifriction material, smooth V6 guide rail, mounting holes with 25mm start and end distances and 50mm intermediate distances, Rosa Sistemi

€392.26

Sold out

RKXR90-C-NX-V

Corrosion-resistant guide roller RKXR.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, eccentric, with Viton seals (up to 120°C), incl. lock washers and nuts, Nadella

€1,065.86

Details

Sold out

3210-BD-XL-C3

Double row angular contact ball bearing 32.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with steel cage, FAG

€55.93

Details

Sold out

CDW35-150-2RS-B-T

CDW-Slider, Compact Rail, robust design made of zinc plated steel, for mounting parallel to the load direction - configuration B, with five prismatic roller bearings -2RS sealed, without wipers, for use in T-rails, Rollon

€318.32

Details