DPHS18

Bore diameter:	18
Outer diameter:	44
Width:	23
Height:	93
Thread type:	female thread right
Thread size:	M18x1,5
Material:	standard

Sold out

EF17-60-502

Heavy-duty rod end EF.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, female left hand thread, maintenance-free, Durbal

€69.93

Details

PAP4040-P200 - 50x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€283.54

Sold out

R133153000

Elastomer wiper seal in metal case of galvanized steel, for segmental linear bushing R0668.., Rexroth

€4.79

Details

Sold out

BRTM18-30-502

Heavy-duty rod end BRTM.. with integral self-aligning roller bearing, series K, male left hand thread, full complement design, galvanized, with shields on both sides, relubricatable, Durbal

Price on request

PAW26-P14 - 10x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€30.16

PAP4030-P10 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€178.43

NUKR40

Track roller with solid roller stud, with profiled outer ring (contact optimized surface), with hexagon socket, full complement cylinderical riller set, seals on both sides, IDC

€45.69

PAP4030-P180 - 50x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€191.30

KRVE40-PP-A

Stud type track roller KRVE.. with eccentric, outer ring profile optimized, solid roller pin, full complement, with axial guidance, sealing by plastic axial plain washer on both sides, INA

€65.19

PAP4040-P180 - 30x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€133.08

PAP4040-P10 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€418.67

EMN17-30-501

Heavy-duty rod end EMN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, male right hand thread, zinc plated, relubricatable, with lip seals on both sides, Durbal

€35.72

PAP4020-P200 - 10x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€58.47

NUKRE40-A

Stud type track roller NUKR.., solid roller pin with eccentric collar, thick-walled outer ring with profiled outer surface, with axial guidance, full complement double-row cylindrical roller set, labyrinth seals on both sides, INA

€70.42

BRF18-00-501

Heavy-duty rod end BRF.. with integral self-aligning roller bearing, series K, female right hand thread, cage design, galvanized, with shields on both sides, relubricatable, Durbal

€79.60

GI18
RF18
SIBP18S
TSF18
JAF18

Product information "DPHS18"