Yoke type track roller with profiled outer ring (contact optimized surface), with center rib and cylindrical rollers, full complement roller set, seals on both sides, IDC
Full complement single row track roller GCUR.. with threaded stud, with profiled outer ring, eccentric, without seals, incl. lock washer and nut, Nadella
Yoke type track roller NUTR.., with profiled outer ring (contact optimized surface), inner ring and flange rings, full complement roller set, labyrinth seals on both sides, INA
Super linear bushing KBA-30-D with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, with wiper seal on one side, Rexroth
Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA
High-quality internal clamping set CLK110, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting without axial hub displacement, for medium to high torques, CMT Line
Standard linear bushing KBMT-30-DD, linear bushings, closed robust all-metal design, hardened and ground sleeve, POM guide cage, with two integrated wiper seals, ungreased, Rexroth
Sprag type freewheel UK.., Ball bearing freewheels, dimensions according to ball bearing 62.., self-centering, sealed on both sides, without keyways, operating temperature -10°C to +60°C, CTS
Standard linear bushing KBMF-30-DD with square flange, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth
Tapered roller bearing 302.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG
Tapered roller bearing 329.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG
Cam follower KRE.. with pin and eccentric collar, with cage-guided needles and convex outer ring, plastic seals on both sides, with hexagon socket, incl. clamping nut, Nadella