FR32-1AS

Price on request

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1038511

Manufacturer: Nadella

Weight: 0.093 kg

Product information "FR32-1AS"

Guide roller FR..-AS, special rollers, pin with internal thread in inner ring, two separate modified ball bearings, concentric, with NBR seals type RS on both sides, Nadella

Bore diameter:	9
Outer diameter:	32
Width:	28,1
Material:	standard

Similar products

PAW18-P14 - 2500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€2,917.20

NATR12

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, gap seals on both sides, INA

€29.50

BEMN12-20-501

Heavy-duty rod end BEMN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, male right hand thread, zinc plated, relubricatable, Durbal

€24.01

PAW18-P200 - 1x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

Price on request

RSTO12

Yoke type track roller RSTO.., needle roller bearings, single row, thick-walled outer ring with profiled outside surface, without inner ring, with needle roller and cage assembly (steel cage), without axial guidance, open, not self-retaining, INA

€20.77

EFN12-20-502

Heavy-duty rod end EFN.. with pressed spherical-plain bearing, sliding pair steel-steel, series E/EH, female left hand thread, zinc plated, relubricatable, Durbal

€22.79

KR32-PP-A-NMT

Stud type track roller KR.. without eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA

€45.02

KRV32-X-PP

Full complement stud type track roller, cylindrical outer ring, with hexagon socket, seals on both sides, IDC

€35.21

6002-C-C3>V

Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€2.05

Sold out

BBE20-UU

Closed standard ball bushing (linear ball bearing), standard, plastic cage, seals on both sides, SNR

€18.63

Details

KSO20-PP

Linear ball bearing KS.. for shaft guidance systems, heavy-duty series, open design - segment cut-out, angle-adjustable, seals on both sides, relubricatable, INA

€35.89

AX41932

Axial needle roller bearing AX.., thick series, single-row axial needle roller cage with built-in thick washer, Nadella

€28.21

1201-TVH

Self-aligning ball bearing 12.., double row radial ball bearings, cylindrical bore, open, with plastic cage, not greased, FAG

€14.08

FR32-EU-AS

Euroroller FR..-EU-AS with double row angular contact ball bearing, pin with internal thread in inner ring, concentric, with NBR seals type RS on both sides, Nadella

€83.69

Sold out

HK2520-2RS-AS1-L271

Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row design, sealed on both sides, with steel cage, with lubrication hole, INA

€6.88

Details