FR62-EI

Price on request

⚠ Out of stock? Available on order. Get in touch with us!

Product number: 1068373

Manufacturer: Nadella

Weight: 0.82 kg

Product information "FR62-EI"

Guide roller FR..-EI, special rollers, with double row ball bearing, concentric, with NBR seals type RS on both sides, incl. lock washer and nuts, Nadella

Outer diameter:	62
Lenght:	80,5
Thread size:	M20x1,5
Material:	standard

Alternative articles to "FR62-EI"*

1038347 - FR62-EU - Nadella

* The products mentioned are merely non-binding suggestions. They may be direct or technical alternatives. Products with similar dimensions may differ in various aspects such as functionality, quality and technical details. These differences and suitability must be checked by the customer using the manufacturer's catalog before ordering.

Similar products

DGE25-AX

Axial spherical-plain bearing DGE..-AX, sliding combination steel-steel, phosphated, relubricatable, Durbal

Price on request

7206-B-XL-MP

Angular contact ball bearing 72..-B-MP, single-row, contact angle α = 40°, with solid brass cage, open - without seals, not greased, FAG

€29.69

Sold out

R073124040

Super linear bushing KBSH-O-40-DD for very high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with two integrated wiper seals, Rexroth

€234.17

Details

Sold out

GCR47-EEM-SW

Full complement single row track roller GCR... with threaded stud, profiled outer ring with optimized radius, eccentric, metal shielded, incl. lock washer and nut, Nadella

€207.58

Details

3305-BD-XL

Double row angular contact ball bearing 33.., radial ball bearings, O-arrangement design with contact angle α = 30°, without filling slot, open design with steel cage, FAG

€39.00

BRTF20-90-501

Heavy-duty rod end BRTF.. in stainless steel, with integral self-aligning roller bearing, series K, female right hand thread, full complement design, with shields on both sides, relubricatable, Durbal

€268.01

Sold out

NA4908-RSR-XL

Needle roller bearing of series NA49.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, seal on one side, INA

€37.76

Details

PAW38-P14 - 100x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€271.56

RKY62

Guide roller RKY.. with tapered roller bearing, with threaded stud, convex raceway side, radius R = 400, concentric, sealed on both sides, incl. lock washers and nuts, Nadella

€231.74

LFZ25X82-A1

Centric bolt LFZ.. with washer, nut, lubrication hole, drive-in grease nipple and sealing cap, for track rollers LFR.., accessories for completing track roller guidance systems, made of high-strength screw steel, INA

€23.72

PM17-01-502

Heavy-duty rod end PM.. with integral self-aligning ball bearing, fine male left hand thread, with shields on both sides, relubricatable, Durbal

€95.05

NATR30-PP-A

Yoke type track roller NATR.., single row, thick-walled outer ring with profiled surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

€57.24

PAW38-P200 - 250x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€1,075.28

Sold out

FRN62

Special guide roller FRN.. with needle roller bearing, raceway with O-ring, slighly convex raceway sides, concentric, sealed on both sides, incl. lock washers and nuts, Nadella

€497.96

Details

Sold out

NUP2305-E-XL-M1A-C3

Single row cylindrical roller bearing NUP2.., locating bearing, two locating ribs on outer ring, inner ring with locating rib and rib washer, cylindrical bore, open, non-greased, with outer ring rib-guided two-piece brass cage, FAG

€85.67

Details