G38X48X4-C

Bore diameter:	38
Outer diameter:	48
Width:	4

R151228013

Single nut with flange, FEM-E-S 25X25RX3,5-2, Ball screw assemblies, sealed, Rexroth

€341.53

PF20-00-502

Heavy-duty rod end PF.. with integral self-aligning ball bearing, female left hand thread, with shields on both sides, relubricatable, Durbal

€99.01

Sold out

DL4020

Full complement needle bush DL.., oped design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€22.82

Details

IR40X48X22-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€9.31

PAW28-P10 - 1000x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,680.12

PAW28-P14 - 100x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€214.42

PAW28-P180 - 500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€932.20

PAW28-P200 - 1000x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€3,467.10

PAW28-P20 - 10x

Thrust washer PAW.., low-maintenance plain bearing, standard material P20 with steel backing, for grease or liquid-lubricated applications: contains lead, with oil distributing pockets, ready to install, lifetime lubrication possible, low wear, low sensitivity to edge loading, good damping characteristics, insensitive to impact loads, good chemical resistance, KS Permaglide®

€33.00

R151234013

Single nut with flange, FEM-E-S 32X10RX3,969-5, Ball screw assemblies, sealed, Rexroth

€355.06

Sold out

LF9

Adjusting nut LF.., spring nuts for precise adjustment, axial locking, standard clamping system with two clamping screws on one spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€94.80

Details

Sold out

DLF4020

Full complement needle bush DLF.., closed end design, needles retained, thin hardened calibrated outer ring made of drawn strip steel, without inner ring, Nadella

€32.20

Details

IR40X48X40-XL

Inner ring IR.. for needle roller bearings, cylindrical, made of hardened bearing steel, raceway precision machined, with chamfers on the end faces, without lubrication hole, INA

€16.71

PAW28-P10 - 500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€898.95

PAW28-P14 - 2500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P14 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, little wear, low friction value, no tendency to fuse with metal, KS Permaglide®

€4,043.33

Product information "G38X48X4-C"