GM4048

Bore diameter:	40
Outer diameter:	48
Width:	11
Material:	standard

PAP4050-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€4,802.27

Sold out

NA22040

Full complement needle roller bearing NA2.., complete bearing, assembly of solid through-hardened outer ring RNA2.. with needle rollers set and BI2.. inner ring, with lubrication hole and groove, Nadella

€185.08

Details

QJ208-XL-MPA

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG

€51.46

BRTF40-30-501

Heavy-duty rod end BRTF.. with integral self-aligning roller bearing, series K, female right hand thread, full complement design, galvanized, with shields on both sides, relubricatable, Durbal

€1,503.20

Sold out

IR40X45X30-EGS

Inner ring IR..-EGS for needle roller bearings, cylindrical, made of hardened rolling bearing steel, surface ground without twist, without lubrication hole, INA

€16.25

Details

PAP4040-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€3,617.25

NN3008-AS-K-M-SP

Super precision cylindrical roller bearing, double-row, with brass-cage, APA

€56.93

LFR50/8-NPP

Locating bearing track roller LFR5.., profiled track rollers, double row angular contact ball bearing with gothic profiled groove in outer ring - 2-point contact, with plastic cage and seals on both sides, INA

€16.61

PM17-00-502

Heavy-duty rod end PM.. with integral self-aligning ball bearing, male left hand thread, with shields on both sides, relubricatable, Durbal

€95.05

K40X45X17-B/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€5.98

PAP4050-P10 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€541.05

B7202-E-T-P4S-UL

Super precision angular contact ball bearing B72..-E (spindle bearing), adjusted, contact angle α = 25°, restricted tolerances, open - without seals, universally combinable, FAG

€93.59

Sold out

LFZ40X107-A1

Centric bolt LFZ.. with washer, nut, lubrication hole, drive-in grease nipple and sealing cap, for track rollers LFR.., accessories for completing track roller guidance systems, made of high-strength screw steel, INA

€71.16

Details

EM40-21-501

Heavy-duty rod end EM.. with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series E/EH, fine male right hand thread, galvanized, maintenance-free, Durbal

€263.75

NATR40-X-PP-A

Yoke type track roller NATR.., single row, thick-walled outer ring with cylindrical surface, axial guidance via thrust washers, with inner ring and needle roller and cage assembly, three-stage sealing on both sides, INA

€103.31

Product information "GM4048"