GRAE45-XL-NPP-B-FA125.5

Bore diameter:	45
Outer diameter:	85
Width:	30,2/43,8
Sealing:	seals on both sides
Cage:	polyamide, hard fabric
Material:	сorrosion-resistant

PAP8055-P200 - 50x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€1,381.40

NKX70-XL

Needle roller/axial ball bearing NKX.., combined axial radial bearings, without inner ring, single direction axial component with ball cage, without protective cap, INA

€155.18

PAP8080-P200 - 50x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€1,876.22

PWTR45-2RS-XL

Yoke type track roller PWTR.., with profiled outer ring (contact optimized surface), with center rib and full complement double-row cylindrical roller set, with axial guidance, full complement roller set, protected lip seals on both sides, INA

€118.98

PAP80100-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€2,921.20

Sold out

32912-H

Tapered roller bearing 329.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€39.54

Details

PAP80100-P180 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€156.04

LR208-2RS

Single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with crowned lateral surface of R=500mm, with plastic cage, lip seals on both sides, INA

€63.60

2209-K-TVH-C3

Self-aligning ball bearing 22.., double row radial ball bearings, tapered bore with 1:12 taper, open, with plastic cage, not greased, FAG

€34.07

Sold out

LF20

Adjusting nut LF.., spring nuts for precise adjustment, axial locking, standard clamping system with two clamping screws on one spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€146.22

Details

QJ209-XL-MPA-C3

Four-point contact bearing QJ2.., radial ball bearings, single row, non self-retaining, solid outer ring without retaining grooves, split inner ring, with brass cage, open design, FAG

€56.54

NNCL4912-V-C3

Double row cylindrical roller bearing, non-locating bearing, three fixed ribs on inner ring, outer ring without ribs, locking ring between rows of rolling elements, full complement, IDC

€100.98

NJ209-E-XL-M1

Single row cylindrical roller bearing NJ2.., semi-locating bearing, two locating ribs on outer ring and one on inner ring, cylindrical bore, open, non-greased, separable, with two-piece roller guided brass cage, FAG

€84.51

Sold out

US209-G2

Bearing insert US2.. for bearing units, spherical outer ring, fixing by socket set screw, shielded on both sides, SNR

€19.70

Details

Sold out

NU2209-E-XL-JP1-C3

Single row cylindrical roller bearing NU2.., non-locating bearing, two locating ribs on outer ring, inner ring without ribs with cylindrical bore, open, non-greased, separable, with steel cage, FAG

€55.09

Details

Product information "GRAE45-XL-NPP-B-FA125.5"