GSH30-XL-2RSR-B

€38.43

Ready for dispatch within 3-5 working days: 89

Product number: 1045931

Manufacturer: INA

EAN: 4012802802900

Weight: 0.28 kg

Product information "GSH30-XL-2RSR-B"

Radial insert ball bearing GSH.., with adapter sleeve for mounting on shaft, spherical outside surface of outer ring, compensates for misalignment, lip seals on both sides, with plastic cage, relubricatable, INA

Bore diameter:	30
Outer diameter:	62
Width:	18/32
Sealing:	seals on both sides
Cage:	polyamide, hard fabric
Material:	standard

Similar products

PK62-C

Guide roller PK.. with tapered roller bearing, track roller, concentric, sealed on both sides, incl. lock washers and nuts, Nadella

€216.62

Sold out

GCR62-SW

Full complement single row track roller GCR.. with threaded stud, profiled outer ring with optimized radius, eccentric, without seals, incl. lock washer and nut, Nadella

€251.76

Details

31305-A

Tapered roller bearing 313.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€22.86

Sold out

FKX62-C

Guide roller FKX.. with tapered roller bearing, convex raceway sides, inner ring with holes for fixing on the shaft, with NBR seals type RS on both sides, Nadella

€226.65

Details

Sold out

FGUL2562-MM

Full complement single row track roller FGUL.. without pin, heavy series, with extra thick-walled cylindrical outer ring, non-separable, metal shielded, Nadella

€180.75

Details

6403-C3

Single row deep groove ball bearing 64.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG

€17.08

6305-2Z

Single row deep groove ball bearing 63.., radial, with steel cage and sheet steel shields on both sides, FAG

€5.12

Sold out

R067010276

Super linear bushing KBA-40-D-RT-32MY with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€83.26

Details

R067024040

Super linear bushing KBA-40-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€85.08

LR205-RRU

Corrosion-resistant single row track roller LR2.., deep groove ball bearing based, without pin, thick-walled outer ring with crowned lateral surface of R=500mm, with plastic cage, INA

€39.39

21305-E1-XL-TVPB-C3

Spherical roller bearing, double row, 213..-E1 series, cylindrical bore, plastic cage, groove and lubrication holes on outer ring, FAG

€48.62

Sold out

R065024030

Standard linear bushing KBMT-40-DD-NR, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, stainless steel guide cage and retaining rings, with two integrated wiper seals, ungreased, Rexroth

€470.74

Details

DGE40-ES-2RS

Radial spherical-plain bearing DGE..-ES, sliding combination steel-steel, series E, phosphated, outer ring with single split, with lip seals on both sides, relubricatable, Durbal

€9.56

3007-2RS

Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, INA

€35.78

Sold out

R063204005

Standard linear bushing KBM-O-40-VD, linear bushings, open robust all-metal design, hardened and ground sleeve, with locating hole for axial and radial securing, steel guide cage, with complete sealing, ungreased, Rexroth

€97.21

Details