HF2016-L564
€13.52
Ready for dispatch within 3-5 working days: 129
Product information "HF2016-L564"
| Bore diameter: | 20 |
|---|---|
| Outer diameter: | 26 |
| Width: | 16 |
| Material: | standard |
Similar products
Regular price:
Product number:
1098272
Manufacturer:
INA
Weight:
0.017 kg
Drawn cup roller clutch HF.. without bearing support, one-way clutches, plastic springs (KF), knurled outer surface, without sealing, to combine with drawn cup needle roller bearings HK and BK, INA
Skip product gallery
6000-C-2HRS
Regular price:
€2.47
Single row deep groove ball bearing 60.., radial, with steel cage and contact seals on both sides, FAG
NK18/16-XL
Regular price:
€9.45
Needle roller bearing NK.., light series, open single row design, ribs on outer ring, without inner ring, steel cage, INA
NX17-XL
Regular price:
€37.18
Needle roller/axial ball bearing NX.., combined axial radial bearings, without inner ring, full complement single direction axial component, retained by protective cap, for oil lubrication, INA
HK2010-B
Regular price:
€3.46
Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row non-sealed design, with steel cage, without lubrication hole, INA
K22X26X10-A/0-7
Regular price:
€3.79
Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA
HK2030-ZW
Regular price:
€5.19
Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, double-row non-sealed design, with steel cage, with lubrication hole, INA
Sold out
KR26-PP-A-NMT
Regular price:
€35.89
Stud type track roller KR.. without eccentric, outer ring profile optimized, solid roller pin, needles cage-guided, with axial guidance, sealing by plastic axial plain washer on both sides, incl. nut and lub. nipple, INA
Sold out
KRV26-B-NMT
Regular price:
€35.50
Stud type track roller KRV.. without eccentric, solid roller pin, full complement, with axial guidance, outer ring with crowning profile R500, gap seals on both sides, incl. nut and lub. nipple, INA
6000-C-C3>V
Regular price:
€1.89
Single row deep groove ball bearing 60.., radial ball bearings, cylindrical bore, with steel cage, open and not greased, FAG
KB16-P
Regular price:
€27.69
Linear ball bearing KB.. for shaft guidance systems, machined range, closed design, outer ring hardened and ground, high-precision guidance in plastic cage, one side sealed, INA
KBS16-PP-AS
Regular price:
€33.02
Linear ball bearing KBS.. for shaft guidance systems, machined range, slotted design, outer ring hardened and ground, high-precision guidance in plastic cage, seals on both sides, relubricatable, INA
AXK1226-A/0-10
Regular price:
€2.01
Axial needle roller and cage assembly AXK.., axial roller bearings, single direction, dimensionally stable cage made from sheet steel, for direct mounting or in combination with axial bearing washers AS.., INA
HK2018-RS-L271
Regular price:
€5.03
Standard drawn cup needle roller bearing HK.., radial needle roller bearings, to DIN 618/ISO 3245, single-row design, sealed on one side, with steel cage, without lubrication hole, INA
Sold out
R067001656
Regular price:
€34.50
Super linear bushing KBA-16 with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, without wiper seals, Rexroth
Sold out
R067225240
Regular price:
€36.41
Super linear bushing KBB-16-DD-RT without misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with two integrated wiper seals, Rexroth