HK1616-AS1-B

Bore diameter:	16
Outer diameter:	22
Width:	16
Cage:	steel cage
Material:	standard

Sold out

FRR22-EU-AS-NX

Corrosion-resistant Euroroller FRR..-EU-AS with double row angular contact ball bearing, pin with internal thread in inner ring, eccentric, with NBR seals type RS on both sides, Nadella

€127.30

Details

R067021240

Super linear bushing KBA-12-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€30.14

Sold out

R074221230

Standard linear bushing KBMM-12-DD-NR, tandem with centered square flange, linear bushings, closed robust all-metal design made of stainless steel, hardened and ground sleeve, steel guide cage, with two integrated wiper seals, ungreased, Rexroth

€291.09

Details

CLK350 12x22

High-quality internal clamping set CLK350, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting with axial hub displacement, for low to medium torques, CMT Line

€17.78

Sold out

R063001200

Standard linear bushing KBM-O-12, linear bushings, open robust all-metal design, hardened and ground sleeve, without locating hole, steel guide cage, without sealing rings, ungreased, Rexroth

€25.31

Details

KR22-PP

Track roller with solid roller stud, with cage-guided needles and profiled outer ring (contact optimized surface), with hexagon socket, seals on both sides, IDC

€24.08

ZM12

Precision locknut ZM, light series, for preloading bearings for screw drives, radially clampable with locking pins, INA

€76.81

Sold out

RNA4900

Needle roller bearing of series RNA49.., single row, outer ring with two ribs, without inner ring, steel cage, IDC

Price on request

30/8-B-2RS-TVH

Double row angular contact ball bearing 30.., radial ball bearings, O-arrangement design with contact angle α = 25°, without filling slot, with plastic cage, seals on both sides, FAG

€18.92

Sold out

FRR22-AS

Guide roller FRR..-AS, special rollers, pin with internal thread in inner ring, two separate modified ball bearings, eccentric, with NBR seals type RS on both sides, Nadella

€101.13

Details

DPOS08

Standard rod end DPOS.. with pressed spherical plain bearing, sliding pair steel-brass, series K, male right hand thread, zinc plated, relubricatable, Durbal

€6.29

Sold out

GCL22-EE-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, with plastic seals, incl. lock washer and nut, Nadella

Price on request

Sold out

R067021276

Super linear bushing KBA-12-DD with misalignment compensation, linear bushings, closed design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, with wiper seal on one side, Rexroth

€30.14

Details

FR22-EU-AZ

Euroroller FR..-EU-AZ with double row angular contact ball bearing, pin with through-hole in inner ring, light convex raceway side, concentric, with NBR seals type RS on both sides, Nadella

€79.96

Sold out

R067311240

Super linear bushing KBB-O-12-D without misalignment compensation, linear bushings, open design, ball retainer and outer sleeve made of PA/POM, hardened steel plates with machined ball guide grooves, reduced radial internal clearance, without wiper seals, Rexroth

€30.85

Details

Product information "HK1616-AS1-B"