HSS7011-E-T-P4S-UL

Bore diameter:	55
Outer diameter:	90
Width:	18
Preload:	light preload
Sealing:	seals on both sides
Cage:	polyamide, hard fabric
Material:	standard

AL25/28 - GL25/28-FP

Roller type freewheel GL..-FP (basic unit to be mounted with covers), two ball bearings of series 160.. supported, one keyway on the inner ring, bolt holes on outer ring, incl. flat seals, CTS

Price on request

Sold out

16011-A-C3

Single row deep groove ball bearing 160.., radial ball bearings, to DIN 625-1, open design with sheet steel cage, not greased, FAG

€21.59

Details

Sold out

FGU5090-MM

Full complement single row track roller FGU.. without pin, light series, with optimized profiled outer ring, non-separable, metal shielded, Nadella

€358.57

Details

Sold out

RNA2060

Full complement needle roller bearing RNA2.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

€156.16

Details

Sold out

30210-XL

Tapered roller bearing 302.., radial roller bearings, single row, metric dimensions, outer ring without ribs, inner ring with two ribs, truncated tapered rollers in cage made of sheet steel, separable, FAG

€25.75

Details

Sold out

FKX90-C-NX

Corrosion-resistant guide roller FKX.. with tapered roller bearing, convex raceway sides, inner ring with holes for fixing on the shaft, with NBR seals type RS on both sides, Nadella

Price on request

Sold out

PKR90-C-NX

Corrosion-resistant guide roller PKR.. with tapered roller bearing, track roller, eccentric, sealed on both sides, incl. lock washers and nuts, Nadella

€1,131.06

Details

Sold out

GCUR90

Full complement single row track roller GCUR.. with threaded stud, with profiled outer ring, eccentric, without seals, incl. lock washer and nut, Nadella

€482.97

Details

Sold out

KR90-EE

Cam follower KR.. with concentric pin, with cage-guided needles and convex outer ring, plastic seals on both sides, with hexagon socket, incl. clamping nut, Nadella

€259.06

Details

Sold out

FGL5090-SW

Full complement single row track roller FGL.. without pin, thick-walled optimized cylindrical outer ring, lubrication hole on inner ring, without seals, Nadella

€297.26

Details

Sold out

R060106010

Standard linear bushing KBM-60-D, linear bushings, closed robust all-metal design, hardened and ground sleeve, steel guide cage, with wiper seal on one side, ungreased, Rexroth

€156.18

Details

Sold out

6308-MA

Single row deep groove ball bearing 63.., radial ball bearings, cylindrical bore, with solid brass cage, open and not greased, FAG

Price on request

Sold out

R073316040

Super linear bushing KBH-O-60-D for high loads, with misalignment compensation, linear bushings, open design, ball retainer made of POM, hardened steel plates with machined back and ball guide grooves, with wiper seal on one side, Rexroth

€291.79

Details

PAP8560-P10 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€624.38

PAP85100-P10 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€4,199.52

Product information "HSS7011-E-T-P4S-UL"