IR50X55X35-EGS

Bore diameter:	50
Outer diameter:	55
Width:	35
Material:	standard

B71907-E-T-P4S-UL

Super precision angular contact ball bearing (spindle bearing), contact angle α = 25°, universal design, APA

€50.12

6006-2Z

Single row deep groove ball bearing 60.., radial, with steel cage and sheet steel shields on both sides, FAG

€4.13

ZKLF1255-2Z-XL

Double row axial angular contact ball bearing, precision bearings for screw mounting, with fixing holes, gap seals on both sides, INA

€312.90

NA4907-RSR-XL

Needle roller bearing of series NA49.., single row, outer ring with two ribs, inner ring without ribs (removable), steel cage, seal on one side, INA

€33.15

RPNA40/55-XL

Adjusting needle roller bearing RPNA.., without inner ring, single row, outer ring with spherical outside surface in outer sleeve with plastic back-up rings to compensate for misalignment, INA

€39.46

Sold out

RNAO45X55X17-XL

Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

€22.48

Details

63006-A-2RSR-C3

Single row deep groove ball bearing 630.., radial, with steel cage and contact seals on both sides, FAG

€16.05

PAP5040-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€5,359.97

PAP5020-P10 - 2500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€10,351.09

DGE35-ES-2RS

Radial spherical-plain bearing DGE..-ES, sliding combination steel-steel, series E, phosphated, outer ring with single split, with lip seals on both sides, relubricatable, Durbal

€7.77

PAP5040-P11 - 500x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P11 with bronze backing, for dry running: contains lead, corrosion resistant, very good thermal conductivity, anti-magnetic, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€8,170.99

Sold out

LRP32.150

Adjusting nut LRP.., wide type, spring nuts for precise adjustment, heavy-duty radial locking, clamping system with two clamping screw on each of two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€234.06

Details

PAP5040-P200 - 500x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€4,524.78

CLK200 28x55

High-quality internal clamping set CLK200, backlash-free shaft-hub connection, non-self-centering design: radial standard height - axial short width, mounting without axial hub displacement, for medium to high torques, CMT Line

€16.12

PAP5060-P200 - 5x

Cylindrical bushing PAP.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€91.22

Product information "IR50X55X35-EGS"