IR55X65X28-XL

Bore diameter:	55
Outer diameter:	65
Width:	28
Material:	standard

Sold out

LFE15

Adjusting nut LFE.., spring nuts for precise adjustment, balanced axial locking, clamping system with two clamping screws on each of two spring-loaded threaded surface, grooves: 4x90°, Sfero-Nadella

€212.11

Details

CLK134 24x65

High-quality internal clamping set CLK134, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for medium to high torques, CMT Line

€18.96

Sold out

RNA1040

Full complement needle roller bearing RNA1.., solid and through-hardened outer ring, without inner ring (for combination with inner rings BI.., BIC.., BICG..), with lubrication hole and groove, Nadella

€78.66

Details

Sold out

NA22040

Full complement needle roller bearing NA2.., complete bearing, assembly of solid through-hardened outer ring RNA2.. with needle rollers set and BI2.. inner ring, with lubrication hole and groove, Nadella

€185.08

Details

Sold out

AM30/65

Precision locknut AM, for preloading bearings for screw drives, axially clampable with four segments, INA

€169.09

Details

RNAO50X65X40

Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

€53.11

RKUR65-V

Guide roller RKUR.. with tapered roller bearing, locating roller, convex raceway side, radius R = 400, eccentric, with Viton-seals (up to 120°C), incl. lock washers and nuts, Nadella

€264.50

CLK110 50x65

High-quality internal clamping set CLK110, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting without axial hub displacement, for medium to high torques, CMT Line

€49.40

CLK250L 55x65

High-quality internal clamping set CLK250L, backlash-free shaft-hub connection, self-centering design: radially flat - axially long, mounting with axial hub displacement, for low to medium torques, CMT Line

€30.44

Sold out

RKULR65

Floating guide roller RKULR.. with tapered roller bearing, convex raceway side, radius R = 400, eccentric,, sealed on both sides, incl. lock washers and nuts, Nadella

€291.43

Details

Sold out

KM9-E

Lock nut KM..-E, for locking of roller bearings on shafts, with four slots on the circumference for locking with lock washer MB.., metric left-hand thread, BGL

€5.28

Details

K60X65X20-A/0-7

Needle roller cage assembly K.., radial needle roller bearings for direct bearing arrangement, DIN 5405-1/ISO 3030, single-row design, cage made of sheet steel, open, INA

€12.23

AS4565

Thrust bearing washer AS.., suitable for axial needle roller and cage assemblies AXK.., for use as a shaft or housing washer, stamped, through-hardened, polished, INA

€1.32

CLK134 32x65

High-quality internal clamping set CLK134, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for medium to high torques, CMT Line

€18.96

CLK134 40x65

High-quality internal clamping set CLK134, backlash-free shaft-hub connection, self-centering design: radial standard height - axial medium width, mounting without axial hub displacement, for medium to high torques, CMT Line

€18.96

Product information "IR55X65X28-XL"