IR60X70X25-EGS

Bore diameter:	60
Outer diameter:	70
Width:	25
Material:	standard

PAP6560-P10 - 5x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€83.42

PAP6560-P180 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€15,826.40

PAP6530-P180 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€278.85

Sold out

DSIL30-T/K M30x2

Standard rod end DSIL..-T/K with pressed spherical plain bearing, sliding pair steel-PTFE, series K, female left hand thread, zinc plated, maintenance-free, Durbal

€49.84

Details

Sold out

BRTM30-90-502

Heavy-duty rod end BRTM.. in stainless steel, with integral self-aligning roller bearing, series K, male left hand thread, full complement design, with shields on both sides, relubricatable, Durbal

Price on request

Sold out

BRF30-60-501

Heavy-duty rod end BRF.. in stainless steel, with integral self-aligning ball bearing, series K, female right hand thread, cage design, with shields on both sides, relubricatable, Durbal

Price on request

BEF30-60-501

Heavy-duty rod end BEF.. in stainless steel with integral spherical-plain bearing, polyamid-PTFE-fibreglass-compound race Durbal-Glide, series K, female right hand thread, maintenance-free, Durbal

€186.77

BEFN30-20-501

Heavy-duty rod end BEFN.. with pressed spherical-plain bearing, sliding pair steel-brass, series K, female right hand thread, zinc plated, relubricatable, Durbal

€113.69

Sold out

LRP45.150

Adjusting nut LRP.., wide type, spring nuts for precise adjustment, heavy-duty radial locking, clamping system with two clamping screw on each of two spring-loaded threaded surfaces, grooves: 4x90°, Sfero-Nadella

€257.96

Details

Sold out

HN10

Hook spanner, HN series, for tightening and loosening shaft nuts on shafts, withdrawal sleeves and adapter sleeves, BGL

€32.63

Details

51110

Axial deep groove ball bearing 511.., single direction, flat housing locating washer (non-angle-adjustable), open, separable, with sheet steel cage, without lubricant, FAG

€14.63

PAP6570-P10 - 25x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€436.13

PAP6530-P10 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€981.06

PAP6570-P10 - 1000x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€16,227.32

PAP6560-P180 - 100x

Cylindrical bushing PAP.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€1,629.67

Product information "IR60X70X25-EGS"