K18X24X20-B/0-7

Bore diameter:	18
Outer diameter:	24
Width:	20
Cage:	steel cage
Material:	standard

Sold out

R065801656

Compact ball bushing KBC-16, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, without wiper seals, without grease, Rexroth

€11.82

Details

Sold out

R065811440

Compact ball bushing KBC-14-D, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seal on one side, without grease, Rexroth

€11.47

Details

Sold out

R065825234

eLINE ball bushing KBC-16-DD-RT-NR-G, ball bushing guides, stainless material, POM ball retainer, reduced radial internal clearance, wiper seals integrated on both sides, with grease, Rexroth

€29.09

Details

PAW12-P10 - 50x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€45.78

PAW12-P180 - 25x

Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€29.68

PAW12-P200 - 250x

Thrust washer PAW.., low-maintenance plain bearing, standard material P200 with steel backing, for grease or liquid-lubricated applications: lead-free, compliant with Directive 2011/65/EU (RoHS II), with oil distributing pockets, ready to install, with lifetime lubrication, low wear, high emergency running properties, insensitive to edge and impact loads, good damping characteristics, good chemical resistance, KS Permaglide®

€50.72

Sold out

FG82415-EE-SW

Full complement single row track roller FG.. without pin, thick-walled profiled outer ring with optimized radius, lubrication hole on inner ring, with plastic seals, Nadella

€53.87

Details

Sold out

GC24-SW

Full complement single row track roller GC.. with threaded stud, profiled outer ring with optimized radius, concentric, without seals, incl. lock washer and nut, Nadella

€62.17

Details

Sold out

RNAO16X24X13-XL

Single row needle roller bearing RNAO.., radial needle roller bearings, non-locating, without ribs on outer ring, without inner ring, non-self-retaining, steel cage, open, INA

€12.15

Details

Sold out

LFR50/8-6-2Z-HLJ

Locating bearing track roller LFR5.., profiled track rollers, double row angular contact ball bearing with gothic profiled groove in outer ring - 2-point contact, with plastic cage and steel shields on both sides, INA

€15.30

Details

Sold out

GCL24-SW

Full complement single row track roller GCL.. with threaded stud, with optimized cylindrical outer ring, concentric, without seals, incl. lock washer and nut, Nadella

€64.63

Details

Sold out

R065805254

Compact ball bushing KBC-16-RT-G, ball bushing guides, standard material, POM ball retainer, reduced radial internal clearance, without wiper seals, with grease, Rexroth

€11.90

Details

Sold out

R065811674

Compact ball bushing KBC-16-D-G, ball bushing guides, standard material, POM ball retainer, normal radial internal clearance, wiper seal on one side, with grease, Rexroth

€12.46

Details

PAW12-P10 - 2500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P10 with steel backing, for dry running: contains lead, very low stick-slip tendency, low wear, good chemical resistance, low coefficient of friction, no tendency to weld to metal, largely resistant to swelling, no water absorption, KS Permaglide®

€1,503.45

PAW12-P180 - 500x

Thrust washer PAW.., maintenance-free plain bearing, standard material P180 with steel backing, for dry running: lead-free, compliant with Directive 2011/65/EU (RoHS II), very low stick-slip tendency, extremely resilient, especially with edge wear, low and constant friction value, very good wear resistance in dry running and wet running, suitable for rotary, oscillating and axial applications, excellent chemical resistance, high resistance to erosion, largely resistant to swelling, compatible with all common dry-running steel shafts, KS Permaglide®

€524.94

Product information "K18X24X20-B/0-7"